Regulation of British Columbia

Occupational Health and Safety Regulation

Citation
B.C. Reg. 296/97
Last amended
September 1, 2027
Read from BC Laws
November 17, 2026
Made under
Workers Compensation Act, RSBC 2019, c. 1
Official text
BC Laws ↗

Contents 2,075 entries

Part 1 — Definitions

1.1 Definitions

Part 2 — Application

2.1 Scope of application 2.2 General duty 2.3 Conflict with a code or standard 2.4 Compliance 2.5 Inspection reports 2.6 Notification of compliance 2.7 Notice to workers 2.8 Contravention

Part 3 — Rights and Responsibilities

Division — Occupational Health and Safety Programs

3.1 When program required 3.2 Small operations 3.3 Contents of program 3.4 Repealed

Division — Workplace Inspections

3.5 General requirement 3.6 Repealed 3.7 Special inspections 3.8 Committee participation

Division — Correction of Unsafe Conditions

3.9 Remedy without delay 3.10 Reporting unsafe conditions 3.11 Emergency circumstances

Division — Refusal of Unsafe Work

3.12 Procedure for refusal 3.12.1 Reassignment of refused work 3.13 No prohibited action

Division — Occupational First Aid

3.14 Definitions 3.15 First aid attendant qualifications 3.16 Basic requirements 3.17 First aid procedures 3.17.1 Air transportation 3.18 Communication and availability 3.19 First aid records 3.20 Multiple employer workplaces 3.21 First aid attendant responsibilities

Division — Young or New Workers

3.22 Definitions 3.23 Young or new worker orientation and training 3.24 Additional orientation and training 3.25 Documentation

Division — Joint Health and Safety Committees

3.26 Evaluation of joint committees 3.27 Minimum training requirements for new joint committee members or worker health and safety representatives

Division — Participation in Investigations

3.28 Participation by employer or representative of employer and worker representative Schedule 3-A Schedule 3-A

Part 4 — General Conditions

Division — Buildings, Structures and Equipment

4.1 Safe workplace 4.1.1 Avalanche risk assessment and safety plan 4.1.2 Avalanche risk assessment and safety plan exception 4.2 Safe buildings and structures 4.3 Safe machinery and equipment 4.4 Conformity to standards 4.5 Manuals and information 4.6 Reassembly 4.7 Information on rated capacity 4.8 Rated capacity 4.9 Inspection and maintenance records 4.10 Authorization 4.11 Startup 4.12 Circumvention of safeguards

Division — Emergency Preparedness and Response

4.13 Risk assessment 4.14 Emergency procedures 4.15 Repealed 4.16 Training 4.17 Notification of fire departments 4.18 Notification of utility service providers

Division — Impairment

4.19 Physical or mental impairment 4.20 Impairment by alcohol, drug or other substance

Division — Working Alone or in Isolation

4.20.1 Definition 4.20.2 Hazard identification, elimination and control 4.21 Procedures for checking well-being of worker 4.22 Training 4.22.1 Late night retail safety procedures and requirements 4.22.2 Mandatory prepayment for fuel 4.23 Annual review of procedures

Division — Workplace Conduct

4.24 Definition 4.25 Prohibition 4.26 Investigation

Division — Violence in the Workplace

4.27 Definition 4.28 Risk assessment 4.29 Procedures and policies 4.30 Instruction of workers 4.31 Advice to consult physician

Division — Work Area Requirements

4.32 Access to work areas 4.33 Arrangement of work areas 4.34 Restricted entry 4.35 Door installations 4.36 Glass 4.37 Restricted visibility 4.38 Extreme temperatures 4.39 Slipping and tripping hazards 4.40 Wet floors 4.41 Waste material 4.42 Cleaning with compressed air

Division — Storing and Handling Materials

4.43 Stacking materials 4.43.1 Storage racks 4.44 Entrapment 4.45 Falling materials

Division — Ergonomics (MSI) Requirements

4.46 Definition 4.47 Risk identification 4.48 Risk assessment 4.49 Risk factors 4.50 Risk control 4.51 Education and training 4.52 Evaluation 4.53 Consultation

Division — Work Area Guards and Handrails

4.54 Definitions 4.55 Guardrail locations 4.56 Exceptions 4.57 Elevated workers 4.58 Specifications for guards and guardrails 4.58.1 Temporary removal of guardrails 4.59 Floor and roof openings 4.60 Toeboards 4.61 Walkways 4.62 Handrails on stairways 4.63 Vehicle travel areas

Division — Illumination

4.64 Definitions 4.65 Illumination levels 4.66 Means of illumination 4.67 Brightness, reflectance and glare 4.68 Illumination measurement 4.69 Emergency lighting

Division — Indoor Air Quality

4.70 Application 4.71 Submitting plans 4.72 Design and operation 4.73 Building modifications 4.74 Distribution 4.75 Balancing 4.76 Ventilation openings 4.77 Discharged air 4.78 Preventive maintenance 4.79 Investigation 4.80 Temperature and humidity

Division — Environmental Tobacco Smoke and E-Cigarette Vapour

4.80.1 Definitions 4.81 Controlling exposure 4.82 Exceptions 4.83 Repealed

Division — Occupational Environment Requirements

4.84 Eating areas 4.85 Washroom facilities 4.86 Change areas 4.87 Unsafe water 4.88-4.106 Repealed Schedule 4-A Schedule 4-A

Part 5 — Chemical Agents and Biological Agents

5.1 Definitions 5.1.1 Designation as hazardous substances 5.2 General information requirement

Division — Workplace Hazardous Materials Information System (WHMIS)

5.3 Application 5.4 Prohibition 5.5 WHMIS program 5.6 Worker education 5.7 Worker training 5.8 Supplier label 5.9 Workplace label for employer-produced products 5.10 Workplace label for decanted products 5.11 Piping systems and vessels 5.12 Placard identifiers 5.13 Laboratory label 5.14 Supplier SDS 5.15 Employer SDS 5.16 Availability of an SDS 5.16.1 Availability of toxicological data 5.17 Deletions from an SDS 5.18 Confidential business information and claims for exemption under the HMIRA 5.19 Repealed

Division — Containers and Storage

5.20 Condition of containers 5.21 Material integrity 5.22 Covers 5.23 Permitted quantities 5.24 Incompatible substances 5.25 Storage practices 5.26 Storage area

Division — Flammable and Combustible Substances

5.27 Ignition sources 5.28 Bonding or grounding of containers 5.29 Electrostatic charge 5.30 Dispensing 5.31 Flammable gas or vapour 5.32 Manual cleaning 5.33 Permitted quantities 5.34 Combustible materials 5.35 Cabinet vent

Division — Substances Under Pressure

5.36 Containers 5.37 Pressure testing 5.38 Handling and securing cylinders 5.39 Cylinder markings 5.40 Cylinder valves 5.41 Fittings 5.42 Repealed 5.43 Empty cylinders 5.44 Acetylene cylinders 5.45 Restriction on use of copper 5.46 Restriction on use of oxygen 5.47 Cleanliness

Division — Controlling Exposure

5.48 Exposure limits 5.49 Excursion limits 5.50 Extended work periods 5.51 Additive effects 5.52 Skin designation 5.53 Workplace monitoring 5.54 Exposure control plan 5.55 Type of controls 5.56 Oxygen deficiency 5.57 Designated substances 5.58 Protective policy 5.59 Investigating symptoms

Division — Ventilation

5.60 Application 5.61 Engineering principles 5.62 Submitting plans 5.63 Building modifications 5.64 Controlling air contaminants 5.65 Worker location 5.66 Ventilation openings 5.67 Effectiveness 5.68 Failure warning 5.69 Makeup air 5.70 Discharged air 5.71 Flammable air contaminants

Division — Internal Combustion Engines

5.72 Venting outdoors 5.73 Indoor operation 5.74 Emission controls 5.75 Mobile equipment emission controls

Division — Hazardous Wastes and Emissions

5.76 Label 5.77 Placard 5.78 SDS 5.79 Sale or disposal 5.80 Sharp-edged waste 5.81 Combustible dust

Division — Personal Hygiene

5.82 Employer's responsibility 5.83 Worker's responsibility 5.84 Prohibition

Division — Emergency Washing Facilities

5.85 Where required 5.86 Water supply 5.87 Access 5.88 Risk assessment 5.89 Equipment required 5.90 Transient worksites 5.91 Remote worksites 5.92 Signs 5.93 Testing 5.94 Training 5.95 Protection from freezing 5.96 Valve operation

Division — Emergency Planning

5.97 Definitions and application 5.98 Worker participation 5.99 Inventory of hazardous substances 5.100 Risk assessment 5.101 Emergency response plan 5.102 Emergency procedures — protection and notification 5.103 Emergency procedures — safe work 5.104 Training and drills

Part 6 — Substance Specific Requirements

Division — Asbestos

6.1 Definitions 6.2 Application

Division — Asbestos Certification and Licensing

6.2.1 Asbestos certificate required 6.2.2 Employer to ensure competence, certification and compliance 6.2.3 Duty of owner and prime contractor

Division — General Requirements

6.3 Exposure control plan 6.4 Inventory 6.5 Identification 6.6 Assessment and classification 6.7 Control of asbestos fibre 6.8 Procedures 6.9 Prohibitions 6.10 Substitution 6.11 Instruction and training 6.12 Monitoring

Division — Designated Work Areas and Containments

6.13 Designated area 6.14 Permanent enclosure design 6.15 Glove bags 6.16 High risk work

Division — Ventilation

6.17 Containment ventilation 6.18 Local exhaust ventilation 6.19 Filter testing

Division — Other Means of Controlling Exposure to Asbestos

6.20 Protecting work surfaces 6.21 Preventing spread 6.22 Wetting material 6.23 Repairing damaged material 6.24 Friction materials

Division — Waste Handling and Disposal

6.25 Sealed containers 6.26 Cleaning containers and equipment 6.27 Waste removal 6.28 Waste disposal

Division — Personal Protective Clothing and Equipment

6.29 Respiratory protection 6.30 Protective clothing 6.31 Information to laundry workers

Division — Documentation

6.32 Retention of records

Division — Biological Agents

6.33 Definitions 6.34 Exposure control plan 6.35 Repealed 6.36 Controls 6.37 Labels and identification 6.38 Repealed 6.39 Vaccination 6.40 Medical evaluation 6.41 Repealed

Division — Hazardous Drugs

6.42 Definitions 6.43 Application 6.44 Identifying hazardous drugs 6.45 Risk assessment 6.46 Exposure control plan 6.46.1 Work procedures 6.47 Reproductive toxins 6.48 Eliminating or controlling exposure 6.49 Contaminated personal protective equipment 6.50 Preparation and administration of certain hazardous drugs 6.51 Instruction and training 6.52 Supervision 6.53 Spill kits 6.54 Storing and labelling hazardous drugs 6.55 Transporting hazardous drugs 6.56 Handling and disposing of waste 6.57 Controlling cross-contamination 6.58 Records

Division — Lead

6.58.1 Definitions 6.59 Application 6.59.1 Risk assessment 6.60 Exposure control plan 6.60.1 Elimination or control of exposure 6.61 Air monitoring for lead 6.61.1 Exceptions to air monitoring requirement 6.62 Warning signs 6.63 Personal hygiene 6.64 Housekeeping 6.65 Prohibited cleaning methods 6.66 Instruction and training 6.67 Health protection 6.68 Records 6.69 Primary lead smelters

Division — Pesticides

6.70 Definitions 6.71 Application

Division — General Requirements

6.72 Pesticide labels 6.73 Placards or signs for treated materials 6.74 Pesticide use 6.75 SDS 6.76 Informing workers

Division — Mixing, Loading and Applying Pesticides

6.77 Qualifications 6.78 Procedures 6.79 Health protection 6.80 Rescue

Division — Equipment

6.81 General requirements 6.82 Fixed stations 6.83 Mobile equipment

Division — Pesticide Application

6.84 Safe application practice 6.85 Posting warning signs 6.86 Design of warning signs 6.87 Warning signs for non-fumigants 6.88 Warning signs for fumigants 6.89 Restricted entry intervals 6.90 Authorization to enter before restricted entry interval expires 6.90.1 Record of entry before restricted entry interval expires 6.91 Exemptions 6.92 Cleanup of residues 6.93 Pesticide drift 6.94 Records

Division — Personal Hygiene

6.95 Wash and shower facilities 6.96 Worker cleanup 6.97 Personal protective clothing and equipment

Division — Avicides, Predicides, Rodenticides and Insecticidal Baits

6.98 Exemption 6.99 Preventive measures

Division — Storage

6.100 Location 6.101 Storage facilities 6.102 Retail displays

Division — Antisapstain Applications

6.103 Substitution 6.104 Ventilation 6.105 Cleaning equipment 6.106 Excess chemical 6.107 Protective clothing 6.108 Records 6.109 Exemption

Division — Respirable Crystalline Silica and Rock Dust

6.110 Definitions 6.111 Application 6.112 Risk assessment 6.112.1 Exposure control plan 6.112.2 Elimination or control of exposure 6.112.3 Air monitoring for RCS dust 6.112.4 Exceptions to monitoring requirement 6.112.5 Blasting enclosures 6.112.6 Housekeeping 6.112.7 Instruction and training 6.113 Rock drills 6.114 Crushing plants 6.115 Asphalt mixing plants 6.115.1 Application of RCS dust provisions

Division — Toxic Process Gases

6.116 Definitions 6.117 Application 6.118 Risk assessment 6.119 Exposure control plan 6.120 Procedures 6.121 Education and training 6.122 Enclosure 6.123 Testing 6.124 Ventilation 6.125 Emergency ventilation 6.126 Shut-down device 6.127 Personal protective equipment 6.128 Monitors and alarms 6.129 Pressure relief alarm systems 6.130 Identification of controls 6.131 Piping systems 6.132 Maintenance

Part 7 — Noise, Vibration, Radiation and Temperature

Division 1 — Noise Exposure

7.1 Definition 7.2 Noise exposure limits 7.3 Noise measurement required 7.4 Exemption 7.5 Noise control and hearing conservation program 7.6 Engineered noise control 7.7 Hearing protection and warning signs 7.8 Hearing tests 7.9 Records to be kept

Division 2 — Vibration Exposure

7.10 Definitions 7.11 Vibration exposure limits 7.12 Evaluation of vibration 7.13 Vibration exposure control obligations 7.14 Information about vibration hazards 7.15 Labels 7.16 Exposure to cold and hand-arm vibration

Division 3 — Radiation Exposure

7.17 Definitions 7.18 Application 7.19 Exposure limits 7.20 Exposure control plan 7.21 Reproductive hazards 7.22 Monitoring exposure 7.23 Standards for use of equipment 7.24 Radiation surveys 7.25 Records

Division 4 — Thermal Exposure

7.26 Definitions 7.27 Application 7.28 Exposure limits 7.29 Heat stress assessment and exposure control plan 7.30 Heat stress controls 7.31 Provision of water 7.32 Removal from and treatment for heat exposure 7.33 Application 7.34 Cold stress assessment and exposure control plan 7.35 Cold stress controls 7.36 Heated shelters 7.37 Clothing and personal protective equipment 7.38 Removal and treatment

Part 8 — Personal Protective Clothing and Equipment

8.1 Definitions

Division — General Requirements

8.2 Responsibility to provide 8.3 Selection, use and maintenance 8.4 Workplace evaluation 8.5 Program 8.6 Annual review 8.7 Instruction 8.8 Supervisor's responsibilities 8.9 Worker's responsibilities 8.10 Personal clothing and accessories

Division — Safety Headgear

8.11 General requirement 8.12 Use with all-terrain vehicles, snowmobiles and motorcycles 8.13 Use with bicycles and skates

Division — Eye and Face Protection

8.14 Eye protection 8.15 Glass lenses 8.16 Side protection 8.17 Face protection 8.18 Repealed

Division — Limb and Body Protection

8.19 General requirement 8.20 Cleaning or replacement 8.21 Leg protection

Division — Footwear

8.22 General requirement 8.23 Slippery surfaces

Division — High Visibility and Distinguishing Apparel

8.24 High visibility apparel 8.25 Distinguishing apparel

Division — Buoyancy Equipment

8.26 When required 8.27 Compliance with standards 8.28 Working alone 8.29 Record of inspection and maintenance 8.30 Retroreflective material

Division — Flame Resistant Clothing

8.31 When required

Division — Respirators

8.32 When respirator required 8.33 Selection 8.34 Maximum use concentration 8.35 IDLH or oxygen deficient atmosphere 8.36 Emergency escape respirators 8.37 Respirable air quality 8.38 Corrective eyewear 8.39 Face seal 8.40 Fit tests 8.41 User seal check 8.42 Medical assessment 8.43 Optional use 8.44 Records 8.45 Maintenance and inspections Schedule 8-A Schedule 8-A

Part 9 — Confined Spaces

9.1 Definitions

Division — General Requirements

9.2 Initial determination 9.3 Prohibited entry 9.4 Control of hazards 9.5 Confined space entry program

Division — Responsibilities

9.6 Administration 9.7 Supervision 9.8 Instruction

Division — Hazard Assessment and Work Procedures

9.9 Hazard assessment 9.10 Procedures 9.11 Qualifications

Division — Identification and Entry Permits

9.12 Identification 9.13 When permits required 9.14 Contents of permit 9.15 Updating the information 9.16 Record of permit

Division — Lockout and Control of Harmful Substances

9.17 Lockout 9.18 Control of harmful substance in adjacent piping 9.18.1 Repealed 9.19 Isolation points 9.20 Blanks and blinds 9.21 Double block and bleed 9.22 Alternative measures of control or isolation of adjacent piping 9.23 Discharge area

Division — Verification and Testing

9.24 Verifying all precautions 9.25 Testing the atmosphere 9.26 Procedures and equipment

Division — Cleaning, Purging, Venting and Inerting

9.27 Cleaning, purging and venting 9.28 Risk control 9.29 Inerting

Division — Ventilation

9.30 Continuous ventilation 9.31 Low hazard atmospheres 9.32 Mechanical ventilation 9.33 Natural ventilation

Division — Standby Persons

9.34 Low hazard atmosphere 9.35 Moderate hazard atmosphere 9.36 High hazard atmosphere, engulfment or entrapment

Division — Rescue

9.37 Provision of rescue services 9.38 Equipment and training 9.39 Notification 9.40 Summoning rescue 9.41 Rescue procedures

Division — Lifelines, Harnesses and Lifting Equipment

9.42 When required 9.43 Standards 9.44 Line entanglement 9.45 Additional workers

Division — Personal Protective Equipment and Other Precautions

9.46 Repealed 9.47 Emergency escape respirator 9.48 Compressed gas cylinders 9.49 Torches and hoses 9.50 Electrical equipment 9.51 Non-sparking tools

Part 10 — De-energization and Lockout

10.1 Definitions 10.2 General requirement 10.3 When lockout required 10.4 Lockout procedures 10.5 Access to energy isolating devices 10.6 Checking locked out equipment 10.7 Worker responsibilities 10.8 Removal of locks 10.9 Group lockout procedure 10.10 Alternative procedures 10.11 Locks not required 10.12 Work on energized equipment

Part 11 — Fall Protection

11.1 Definitions 11.2 Obligation to use fall protection 11.3 Fall protection plan 11.4 Selection of harness or belt 11.5 Equipment standards 11.6 Anchors 11.7 Temporary horizontal lifelines 11.8 Certification by engineer 11.9 Inspection and maintenance 11.10 Removal from service 11.11-11.40 Repealed

Part 12 — Tools, Machinery and Equipment

12.1 Definitions

Division — General Requirements

12.2 Safeguarding requirement 12.3 Standards 12.4 Effectiveness of safeguards 12.5 Fixed guards 12.6 Lubrication 12.7 Repealed 12.8 Repealed 12.9 Repealed 12.10 Identifying unsafe equipment 12.11 Operating controls 12.12 Machinery location 12.13 Marking physical hazards 12.14 Identification of piping 12.15 Restraining devices

Division — Guarding Mechanical Power Transmission Parts

12.16 Rotating hazards 12.17 Gears and sprockets 12.17.1 Safeguards for objects or materials 12.18 Reciprocating machinery 12.19 Drive belts 12.20 Reaching up 12.21 Flywheels and pulleys

Division — Conveyors

12.22 Standards 12.23 Belt-type conveyors 12.24 Screw-type conveyors 12.25 Feed points 12.26 Repealed 12.27 Falling materials 12.28 Emergency stopping devices

Division — Power Presses, Brake Presses and Shears

12.29 Standards 12.30 Point of operation safeguarding 12.31 Exception for custom work 12.32 Supervisory control 12.33 Repealed

Division — Feed-rolls and Metal-forming Rolls

12.34 Feed-rolls 12.35 Guard design 12.36 Metal-forming rolls

Division — Machine Tools

12.37 Splash guards and shields 12.38 Lathe chucks 12.39 Restriction on hand polishing 12.40 Stock projection 12.41 Shapers/planers 12.42 Carriage travel 12.43 Vertical boring mills

Division — Abrasive Equipment

12.44 Standards 12.45 Protective hood 12.46 Speed of abrasive wheels 12.47 Grinding prohibitions 12.48 Work rests 12.49 Dust control 12.50 Repealed

Division — Powder Actuated Tools

12.51 Standards 12.52 Tool selection 12.53 Tool design 12.54 Markings 12.55 Storage 12.56 Tool use 12.57 Limitations on use

Division — Woodworking Tools and Equipment

12.58 Hand feeding 12.59 Removing guards 12.60 Kickback fingers, splitters and spreaders 12.61 Radial arm saw travel limits 12.62 Jointers 12.63 Sanding machines 12.64 Tenoning machines 12.65 Hand-held circular saws 12.66 Cutting heads 12.67 Band saws

Division — Mobile Chippers

12.68 Hand-fed chippers 12.69 Self-feeding chippers 12.70 Driven-feed chippers 12.71 Vertically fed chippers

Division — Chain Saws

12.72 Standards 12.73 Stopping chain movement

Division — Automotive Lifts and Other Vehicle Supports

12.74 Standards 12.75 Assembly and installation 12.76 Operation 12.77 Records 12.78 Inspection and testing 12.79 Rated capacity 12.80 Controls 12.80.1 Vehicle restraint 12.80.2 Swing-arm restraint

Division — Miscellaneous Equipment

12.81 Tumblers 12.82 Pneumatic nailing and stapling tools 12.83 Industrial robots 12.83.1 Chassis dynamometers — motor vehicle testing

Division — Drilling Rock or Similar Materials

12.84 General requirement 12.85 Drilling equipment 12.86 Control location 12.87 Boom hazard 12.88 Drill jumbos 12.89 Drilling procedures 12.90 Rod handling 12.91 Self-propelled rock drills 12.92 Cleaning drilled holes

Division — Breaking and Melting Metal

12.93 Breaking metal 12.94 Inspection of linings 12.95 Preventing eruptions 12.96 Inspection of materials

Division — Abrasive Blasting and High Pressure Washing

12.97 Definitions 12.98 Risk assessment 12.99 Work procedures outside a cabinet 12.100 Substitution 12.101 Reuse prohibition 12.102 Cleanup 12.103 Engineering controls 12.104 Exhaust ventilation 12.105 Restricted work zones 12.106 Operating controls 12.107 Repealed 12.108 Jetting gun 12.109 Holding work 12.110 Hose restraint 12.111 Personal protective equipment

Division — Welding, Cutting and Allied Processes

12.112 Standards 12.113 Repealed 12.114 Ventilation 12.115 Coatings on metals 12.116 Flammable and explosive substances 12.117 Silver solder 12.118 Correct equipment 12.119 Equipment inspection 12.120 Flashback prevention 12.121 Receptacles for stubs 12.122 Radiation protection 12.123 Protective clothing and equipment 12.124 Respiratory protection 12.125 Marking hot work 12.126 Fire extinguishers

Division — Painting, Coating and Work with Plastics and Resins

12.127 Application 12.128 Substitution 12.129 Restrictions 12.130 Warning signs 12.131 Enclosure 12.132 Air flow 12.133 Control of ignition sources 12.134 Arrester filters 12.135 Respiratory protection 12.136 Disposal of isocyanate containers 12.137 Repealed 12.138 Airless spray equipment 12.139 Design for high pressure 12.140 Heating plastics 12.141 Resin foams

Division — Laundry and Dry Cleaning Activities

12.142 Definitions

Division — Dry Cleaning

12.143 Open cleaning prohibited 12.144 Systems and equipment 12.145 Equipment labels 12.146 Solvent handling 12.147 Bulk storage 12.148 Machine ventilation 12.149 General ventilation 12.150 Inspection and repair 12.151 Open flame heaters 12.152 Combustion air supply 12.153 Vents 12.154 Servicing and maintenance 12.155 Emergency ventilation 12.156 Spotting chemicals 12.157 Supplier responsibility 12.158 Operator responsibility

Division — Laundry Equipment

12.159 Flatwork ironers 12.160 Roller-type ironers 12.161 Press-type ironers 12.162 Interlocks 12.163 Centrifugal extractors 12.164 Laundry chutes 12.165 Laundry carts 12.166 Spillage

Division — Rail Car Movement

12.167 Application 12.168 General requirements 12.169 Clearance 12.170 Riding restriction 12.171 Brakes 12.172 Tracks

Division — Pressure Vessels

12.173 Pressure relief device — when required 12.174 Pressure relief device — installation

Division — Roll-on/Roll-off Containers

12.175 Definitions 12.176 Container safety standard 12.177 Protection against specified hazards 12.178 Visual inspection before loading container onto vehicle 12.179 Withdrawal from service 12.180 Inspection following repair 12.181 Periodic inspection 12.182 Records of inspection 12.183 Withdrawal from service following inspection

Part 13 — Ladders, Scaffolds and Temporary Work Platforms

Division 1 — General

13.1 Definitions 13.2 Standards 13.3 Inspections

Division 2 — Ladders

13.4 Manufactured ladders 13.5 Position and stability 13.6 Use restrictions

Division 3 — Work Platforms

13.7 Access 13.8 General requirements 13.9 Lines supporting work platforms 13.10 Hooks and clamps 13.11 Engineering required 13.12 Removal from service

Division 4 — Scaffolds

13.13 Responsibilities 13.14 Scaffold platforms 13.15 Manufactured components 13.16 Lumber for structural components 13.17 Scaffold stability 13.18 Connections 13.19 Electrical hazards

Division 5 — Movable Work Platforms

13.20 Marking of the equipment 13.21 Manuals 13.22 Maintenance of records 13.23 Testing 13.24 Work platforms on wheels 13.25 Warning devices on elevating work platforms 13.26 Controls on elevating work platforms 13.27 Cranes and hoists used to suspend work platforms 13.28 Two-blocking 13.29 Hoisting and lowering work platforms 13.30 Lift truck mounted work platforms 13.31 Powered platforms 13.32 Work in high risk situations 13.33 Fall protection

Part 14 — Cranes and Hoists

14.1 Definitions 14.1.1 Application

Division — General Requirements

14.2 Standards 14.3 Identification 14.4 Repealed 14.5 Rated capacity indication 14.6 Repealed 14.7 Boom angle indicator 14.8 Boom extension and load radius indicators 14.9 Logging exemption 14.10 Reeved-in devices 14.11 Support structure 14.12 Manual and instructions 14.13 Inspection, maintenance and repair 14.14 Inspection and maintenance records 14.15 Modifications 14.16 Certification required 14.16.1 Certification following misadventure 14.17 Access and egress 14.18 Audible warning 14.19 Drop stops 14.20 Rail end stops 14.21 Fenders 14.22 Securing pins 14.23 Boom stops 14.24 Molten metal 14.25 Repealed 14.26 Sheave guards 14.27 Ungrounded supply 14.28 Controls 14.29 Operator protection 14.30 Cab windows 14.31 Operator's seat 14.32 Storage 14.33 Fire extinguisher

Division — Equipment Operation

14.34 Operator qualifications 14.34.1 Operator certification 14.35 Pre-use inspection 14.36 Load weight 14.37 Calibration 14.37.1 Operator's duties 14.38 Safe lifting 14.39 Repealed 14.40 Swing and shear hazards 14.41 Position of equipment 14.42 Tandem lift 14.42.1 Critical lift 14.43 Travelling with a load 14.44 Loads over work areas 14.45 Unattended loads 14.46 Vertical load line 14.47 Signals 14.48 Alternative to hand signals 14.49 Dedicated radio system 14.49.1 Communication between equipment operators 14.50 Unhooking loads 14.51 Riding hook or load 14.52 Induced voltage 14.52.1 Work near high voltage 14.53 Repealed

Division — Bridge, Gantry and Overhead Travelling Cranes

14.54 Operational and running tests 14.54.1 Detailed inspection 14.55 Uptravel limit 14.56 Electrical conductors 14.57 Power shutoff 14.58 Direction markings

Division — Pneumatically Powered Hoists and Winches

14.59 Pneumatically powered hoists 14.60 Repealed

Division — Manually Powered Hoists

14.61 Brakes 14.62 Crank handles

Division — Mobile Cranes, Boom Trucks and Sign Trucks

14.63 Repealed 14.64 Load weight indicators 14.65 Repealed 14.66 Level turntable 14.67 Outriggers and stabilizers 14.68 Tires 14.69 Supporting surface 14.70 Travelling with a load 14.71 Annual inspection 14.72 Boom inspection 14.73 Sign trucks

Division — Tower Cranes

14.73.1 Definitions 14.73.2 Tower crane erection and other tower crane activities 14.73.3 Notice of project 14.74 Tower crane support 14.75 Before use 14.76 Identification 14.77 Structural inspection 14.78 Structures kept clean 14.79 Manual and records 14.80 Counterweights and ballasts 14.81 Limit devices 14.82 Test blocks 14.83 Operator's cab 14.84 Monitoring jib swing 14.84.1 Overlapping operating zones 14.85 Clearance and freedom to slew 14.86 Repealed 14.87 Repealed 14.88 Access 14.89-14.90 Repealed 14.91 Hoisting ropes 14.92 Wind limitations 14.93 Temperature limitations 14.94-14.95 Repealed

Division — Construction Material Hoists

14.96 Certifications and instructions 14.97 Rider restriction 14.98 Notices 14.99-14.115 Repealed

Division — Chimney Hoists

14.116 Permission to use 14.117 Certification 14.118 Support structures 14.119 Load rating 14.120-14.132 Repealed Schedule 14-A Schedule 14-A

Part 15 — Rigging

15.1 Definitions

Division — General Requirements

15.2 Qualified riggers 15.3 Detaching loads 15.4 Use of rigging 15.5 Component identification 15.6 Design factors 15.7 Wire rope on mobile cranes 15.8 Natural fibre rope 15.9 Wedge socket connections 15.10 Open hook restriction 15.11 Securing pins 15.12 Replacing pins 15.13 Repealed 15.14 Securing ropes to drums 15.15 Wraps required 15.16 Reeving lines 15.17 Sheaves 15.18 Guylines 15.19 Spooling rope 15.20 Hand signals 15.21 Termination efficiencies 15.22 Wire rope clips 15.23 Wire rope splices 15.24 Restriction on fold back eyes 15.25 Wire rope rejection criteria 15.26 Nonrotating wire rope 15.27 Contact with electric arc 15.28 Welding 15.29 Hook rejection criteria

Division — Slings

15.30 Standards 15.31 Inspection before use 15.32 Makeshift fitting prohibition 15.33 WLL of slings 15.34 Sling angles 15.35 Repealed 15.36 Proof-testing slings 15.37 Storage 15.38 Knots 15.39 Sharp edges 15.40 Slinging loads 15.41 Multiple piece lifts

Division — Wire Rope Slings

15.42 Sling identification 15.43 Rejection criteria 15.44 Prohibited slings 15.45 Temperature restrictions

Division — Alloy Steel Chain Slings

15.46 Sling identification 15.47 Chain for hoisting 15.48 Chain removal criteria 15.49 Chain wear 15.50 Periodic inspection 15.51 Temperature restriction

Division — Synthetic Web Slings

15.52 Sling identification 15.53 Temperature restriction 15.54 Synthetic web sling rejection criteria

Division — Metal Mesh Slings

15.55 Sling identification 15.56 Rejection criteria

Division — Below-the-hook Lifting Devices

15.57 Standards 15.58 WLL 15.59 Identification 15.60 Part of lifted load

Part 16 — Mobile Equipment

16.1 Definitions 16.2 Application

Division — Division 1 — General Operating Requirements

16.3 Pre-operational inspection and monitoring 16.4 Secure objects and clean surfaces 16.5 Seat belt use 16.6 Obstructed views and pedestrians 16.7 Boarding or leaving 16.8 Rider restrictions 16.9 Unattended mobile equipment 16.10 Clearance of swinging loads or parts 16.11 Loads elevated over cabs 16.12 Securing loads 16.13 Securing elevated parts 16.14 Air brake competency 16.15 Control on grades or slopes 16.16 Tire servicing 16.17 Maintenance and records 16.18 High voltage contact

Division — Division 2 — General Machine Requirements

16.19 Non-slip floors and controls 16.20 Seats 16.21 Seat belts 16.21.1 When minimum 3-point seat belts required 16.22 Starter engagement 16.23 Steering wheel knobs 16.24 Alternative means of escape from a cab 16.25 Fuel tank fill point or vent 16.26 Mirrors 16.27 Lights 16.28 Warning signal device — extended component 16.29 Brakes 16.30 Load handling attachments 16.31 Load ratings 16.32 Safeguards for moving parts 16.33 Safeguards against objects, materials and tipovers 16.34 Rollover protective structure (ROPS) 16.35 ROPS standards 16.36 ROPS certification 16.37 ROPS identification 16.38 Rollover or tipover and fire

Division — Division 3 — Additional Requirements for Specific Prime Movers

16.39 All-terrain cycles 16.40 ATVs 16.41 UTVs 16.42 Earth-movers 16.43 Lift trucks Schedule 16-A Schedule 16-A Schedule 16-B Schedule 16-B Schedule 16-C Schedule 16-C

Part 17 — Transportation of Workers

Division — General Requirements

17.01 Definitions 17.1 Application 17.1.1 General responsibilities 17.1.2 Provision for seating and seat belt assemblies 17.2 Employer's responsibility 17.2.1 Operator responsibility 17.2.2 General operation requirements 17.2.3 Provision for seat belts 17.3 Repealed 17.4 Riding restrictions 17.5 Securing equipment 17.5.1 Gross vehicle weight rating 17.6 Hazardous materials 17.7 Carrying animals 17.8 Passenger compartments 17.9 Boarding and leaving

Division — Worker Transportation Vehicles Not Designed for Use on Highways

17.10 Vehicle design 17.11 Repealed 17.12 Seating design 17.13 Seating capacity 17.14 Aisles

Division — Marine Craft

17.15 Repealed 17.16 Repealed 17.17 Safety standards 17.18 Operation 17.19-17.21 Repealed 17.22 Communication 17.23 Vessel preparation 17.24 Maintenance and inspection 17.25 Anti-skid covering 17.26 Lighting

Division — Aircraft

17.27 Repealed

Part 18 — Traffic Control

Division — General Requirements

18.1 Definitions 18.2 Employer responsibility 18.3 Standards for traffic control 18.3.1 Risk assessment 18.3.2 Traffic control plan 18.3.3 Order of control measures 18.4 Supervision 18.5 Placement of temporary traffic control devices

Division — Traffic Control Persons

18.6 Prohibitions 18.6.1 Emergency management 18.6.2 Traffic control person training 18.6.3 Traffic assistant training 18.7 Traffic control person to remain on duty 18.8 Location of traffic control persons

Division — Equipment for Traffic Control Persons

18.9 Operations during daytime 18.10 Operations during darkness or poor visibility 18.11 Equipment maintenance

Division — Directions and Signals by Traffic Control Persons

18.12 Precise motions 18.13 Communication between traffic control persons 18.14 Repealed

Division — Other Requirements

18.15 Dust control 18.16-18.17 Repealed

Part 19 — Electrical Safety

19.1 Definitions

Division — General Electrical Requirements

19.2 Repealed 19.3 Poles and structures 19.4 Obstructions on poles 19.5 Informing workers 19.6 Service rooms 19.7 Space around equipment 19.8 Testing equipment 19.9 Insulated elevating work platform

Division — Working on Low Voltage Electrical Equipment

19.10 Disconnection and lockout 19.11 Warning signs 19.12 Working close to energized equipment 19.13 Identification of controls 19.14 Grounding portable equipment 19.15 Ground fault circuit interrupters

Division — Working on High Voltage Electrical Equipment

19.16 Isolation and lockout 19.17 Warning signs

Division — Working on De-energized High Voltage Power Systems

19.18 Isolation and lockout 19.19 Person in charge 19.20 Switching sequences 19.21 Isolating devices 19.22 Grounding and blocking 19.23 Multiple authorities

Division — Minimum Separation Distance to be Maintained from Energized High Voltage Electrical Equipment and Conductors

19.24 Informing workers about high voltage electrical equipment and conductors 19.24.1 Minimum approach distance when working close to exposed electrical equipment and conductors 19.24.2 Minimum clearance distance when passing under exposed electrical equipment and conductors 19.25 Assurance in writing 19.26 Assurance not practicable 19.27 Specially trained 19.28 Emergency work 19.29 Authorization by owner

Division — Tree Pruning and Falling near Energized Conductors

19.30 Preliminary inspection 19.31 Work in a hazardous area 19.32 Qualifications 19.33 Site crew requirements 19.34 Limits of approach 19.34.1 Crossing the neutral conductor 19.35 Tree pruning and falling equipment

Division — Control Systems

19.36 General requirements 19.37 Programmable control systems 19.38 Automatic control systems 19.39 Remote control systems 19.40 Wireless remote control

Division — Electrofishing

19.41 General requirements 19.42 Repealed 19.43 Manufacturer's instructions

Part 20 — Construction, Excavation and Demolition

20.1 Definitions

Division — General Requirements

20.1A Qualified contractor 20.2 Notice of project 20.2.1 Notice of project — hazardous substances 20.3 Coordination of multiple employer workplaces

Division — Washroom Facilities at Construction Sites

20.3.1 Definitions 20.3.2 Toilets at specified construction sites

Division — Safe Work Areas and Safe Access

20.4 Safe access 20.5 Temporary floors 20.6 Design loads 20.7 Repealed 20.8 Repealed 20.9 Protection from falling materials 20.10 Chutes 20.11 Repealed 20.12 Glass panels 20.13 Thrust-out crane landing platforms 20.14 Temporary support 20.14.1 Fills 20.14.2 Stockpiles 20.14.3 Unstable face of a stockpile

Division — Bridges and Similar Structures

20.15 Drawings and special procedures 20.16 Walkways

Division — Concrete Falsework and Formwork

20.16.1 Definitions 20.16.2 Application 20.17 Worksite-specific plans required for specified formwork 20.18 Certification of worksite-specific plans by professional engineer 20.19 Continuity of engineering 20.20 Information for worksite-specific plans 20.21 Application drawings and supplementary instructions for flyforms 20.22 Flyform handling 20.23 Supervision 20.24 Equipment requirements 20.25 Concrete placing hazards 20.26 Inspections

Division — Concrete Pumping

20.26.1 Definition 20.26.2 Application of regulation 20.26.3 Standards 20.26.4 Duty to ensure operator's competence 20.26.5 Certification authority 20.26.6 Operator certification 20.27 Equipment identification 20.28 Manufacturer's, supplier's or integrator's manual 20.29 Inspection and maintenance records 20.30 Pre-use inspection 20.30.1 Design and construction 20.31 Controls 20.32 Hydraulic cylinders 20.33 Marking weight 20.34 Lifting a pump 20.35 Securing a pump 20.36 Repealed 20.37 Agitator guarding 20.38 Engine exhaust 20.39 Housekeeping 20.40 Outriggers 20.41 Repealed 20.42 Pipe diameter and thickness 20.43 Pipe clamps 20.44 Delivery pipe 20.45 Restraining devices 20.46 Concrete pump lines 20.47 Equipment inspection 20.48 Repair and modification 20.48.1 Installation of mast 20.49 Boom and mast weight 20.50-20.52 Repealed 20.53 Repealed 20.54 Hopper signal device

Division — Tilt-up Building Construction

20.55 Specifications and plans 20.56 Design requirements 20.57 Panel handling 20.58 Inspections 20.59 Brace removal

Division — Concrete Pre-stressing and Post-tensioning

20.60 General requirements 20.61 Signalling devices and restricted areas 20.62 Strand measuring 20.63 Guarding during pre-stressing operations 20.64 Deflecting devices 20.65 Detensioning and strand cutting procedures 20.66 Strand vises and hydraulic devices 20.67 Hydraulic equipment 20.68 Platform width 20.69 Blowouts 20.70 Tendon handling 20.71 Securing jacks

Division — Open Web Joists and Trusses

20.72 Erection instructions

Division — Roof Work

20.73 Repealed 20.74 Crawl boards and ladders 20.75 Steep roof requirements 20.76 Chutes and hoists 20.77 Mechanical equipment

Division — Excavations

20.78 Work standards 20.79 Underground utility services 20.80 Removing nearby hazards 20.81 Sloping and shoring requirements 20.82 Timber shoring and grades 20.83 Safe shoring procedures 20.84 Repealed 20.85 Trench support structures 20.86 Spoil piles 20.87 Entry and exit 20.88 Guarding 20.89 Excavation crossings 20.90 Excavated materials 20.91 Use of skips or buckets 20.92 Scaling and trimming 20.93 Height limitations 20.94 Positioning equipment 20.95 Water accumulation

Division — Scaling Operations

20.96 Definitions 20.97 Work from top down 20.98 Rappelling and work positioning systems 20.99 Rappelling ropes 20.100 Anchors and other hardware 20.101 Harnesses

Division — Marine Construction, Pile Driving and Dredging

20.102 Suspended work platforms 20.103 Hoisting piles 20.104 Operator protection 20.105 Exhaust discharge 20.106 Chocking the hammer 20.107 Pile heads 20.108 Cracked hammer 20.109 Splicing 20.110 Walkway on discharge line

Division — Demolition

20.111 Structural integrity 20.112 Hazardous materials 20.113 Disconnecting utility services 20.114 Glass removal 20.115 Repealed 20.116 Protection from falling materials 20.117 Throwing material 20.118 Stabilizing walls 20.119 Dismantling buildings 20.120 Housekeeping 20.121 Stairways

Division — Work in Compressed Air

20.122 Medical fitness 20.123 Compliance with standards

Part 21 — Blasting Operations

21.1 Definitions

Division — Division 1 — General Requirements

21.2 Employer's responsibility 21.2.1 Planning and conducting blasting operations 21.3 Dangerous incident reports 21.4 Blasting log 21.5 Authority to blast 21.6 Repealed 21.6.1 General — explosives and blasting accessories 21.6.2 Technical data sheets and manufacturer's instructions 21.7 Training

Division 2 — Certification of Blasters

21.8 Qualifications 21.8.1 Continuing professional development — blasters 21.9 Misrepresentation 21.10 Examination 21.11 Recording certificates 21.12 Custody of certificates 21.13 Suspension of duties 21.14 Submitting reports 21.15 Suspension of certificates

Division 3 — Storage

21.16 Detonators 21.17 Worksite storage 21.18 Communication 21.19 Magazine condition 21.20 Repealed 21.21 Separate handling

Division 4 — Transportation

21.22 Vehicle operation 21.23 Flammable materials 21.24 Transportation of explosives 21.25 Mobile drilling rigs 21.26 Repealed 21.27 Repealed 21.28 Emergency procedures 21.29 Safe operation 21.30 Repealed 21.31 Firefighting equipment 21.32 Trailer transportation 21.33 Railroad and highway crossings 21.34 Repealed 21.35 Overnight parking

Division 5 — Handling Explosives

21.36 Repealed 21.37 Defective explosives 21.38 Cold temperatures 21.39 Disposal of explosives 21.40 Ignition sources prohibited 21.41 Containers

Division 6 — Drilling

21.42 Predrilling requirements 21.43 Drilling prohibitions 21.44 Drill hole size 21.44.1 Anomalous drill hole

Division 7 — Loading

21.45 Priming 21.46 Carrying 21.47 Cartridges 21.48 Loading tools 21.49 Electrical storms 21.50 Guarding loaded holes 21.51 Vehicles 21.52 Springing holes 21.53 Connecting detonating cord 21.54 Shock tubes 21.55 Pneumatic loading

Division 8 — Safety Fuse Assembly Initiation

21.56 Safety fuse assemblies 21.57 Lighting safety fuse assembly

Division 9 — Electrical Initiation

21.58 Stray currents 21.59 Extraneous currents 21.60 Static electricity 21.61 Radio frequency precautions 21.62 Mobile transmitters 21.63 Testing electric blasting circuits 21.63.1 Confirming electronic detonator integrity 21.64 Capacity of blasting machines 21.65 Firing from power lines

Division 10 — Firing

21.66 Responsibilities of blasters and employers 21.67 Firing lines 21.68 Firing all holes 21.69 Blasting signals 21.70 Posting warning procedures

Division 11 — After the Blast

21.71 After the blast 21.72 Electrical blasting

Division 12 — Misfire Procedures

21.73 Misfires 21.74 Blast site examination 21.74.1 Misfire marking 21.74.2 Extracting explosives 21.75 Cutoffs and unexploded explosives 21.76 Excavating and scaling 21.76.1 Drilling for refiring 21.77 Repealed 21.78 Safety fuse assembly reblast 21.79 No relighting 21.80-21.81 Repealed

Division 13 — Specialized Blasting Operations

21.82 Underwater blasting 21.83 Special effects blasting 21.84 Seismic blasting 21.85 Avalanche control

Division 14 — Close Proximity Blasting

21.86 Definitions 21.87 Application of Division 21.88 Notice of project 21.89 Emergency notice 21.90 Notice to occupants of proximate structures 21.91 Written plan 21.92 Suspension of blasting 21.93 General requirements

Part 22 — Underground Workings

22.1 Definitions

Division — General Requirements

22.2 Application 22.3 Work methods 22.4 New or unusual situations 22.5 Preconstruction meeting 22.6 Notice of project 22.7 Underground record 22.8 Hours of work 22.9 Additional first aid 22.10 Retroreflective devices 22.11 Self-rescuers

Division — Supervision of Workers

22.12 Appointment of underground working supervisor 22.12.1 Role of underground working supervisor 22.13 Underground worker health and safety representative 22.14 Impaired persons

Division — Working Requirements

22.15 Responsibility for ventilation 22.16 Prior approval 22.17 Qualified person 22.18 Mechanical ventilation 22.19 Air flow 22.20 Portal fan 22.21 Auxiliary fan 22.22 Modifications 22.23 Malfunction 22.24 Unventilated areas 22.25 Duct air testing 22.26 Welding fumes 22.27 Heating underground air 22.28 Heating equipment 22.29 Other heating devices 22.30 Atmospheric testing 22.31 Testing during construction 22.32 Additional tests 22.33 Radioactivity survey 22.34 Electrical installations 22.35 Communications 22.36 Illumination 22.37 Cap lamps 22.38 Maintenance 22.39 Auxiliary lighting 22.40 Battery charging stations 22.41 Pipelines 22.42 Water control 22.43 Dams 22.44 Transportation of workers 22.45 Transportation of workers by rail 22.46 Shaft conveyances

Division — Emergency Requirements

22.47 Procedures 22.48 Coordination 22.49 Evacuation procedure 22.50 Refuge stations 22.51 Rescue workers 22.52 Self-contained breathing apparatus 22.53 Dangerous conditions 22.54 Fire prevention and control 22.55 Flammable gas restriction 22.56 Equipment fire extinguishers 22.57 Accounting for workers

Division — Entrance to Underground Working

22.58 General requirement 22.59 Structures at the entrance 22.60 Projecting support system 22.61 Spill control

Division — Ground Control

22.62 General requirement 22.63 During excavation 22.64 Shotcrete 22.65 Operator protection

Division — Drilling

22.66 Probe holes 22.67 Connecting to existing workings 22.68 Blasting at adjacent sites 22.69 Inspection before abandonment

Division — Underground Use of Explosives

22.70 Transport of explosives 22.71 Mechanical haulage 22.72 Transport by track haulage 22.73 Underground storage of explosives 22.74 Restriction on ignition sources 22.75 Fume class 22.76 Blasting line 22.77 Remote initiation 22.78 Water spray 22.79 Return to blasting site 22.80 Work restriction 22.80.1 No safety fuse assembly in underground working

Division — Mechanical Excavation

22.81 Dust control 22.82 Work clearance 22.83 Elevated work

Division — Fixed and Mobile Equipment in Underground Working

22.84 Logs 22.85 Internal combustion engines 22.86 Fire suppression 22.87 Hoses carrying flammable liquid 22.88 Operating requirements

Division — Underground Haulage

22.89 Traffic control 22.90 Clearance for mechanical haulage 22.91 Track haulage and mucking equipment 22.92 Equipment hazard area 22.93 Switching 22.94 Derailed equipment 22.95 Track haulage operations 22.96 Rail tracks and switches

Division — Trackless Loading and Hauling

22.97 Automated and remote control systems 22.98 Clearance lights 22.99 Road maintenance

Division — Waste Dumps and Spoil Areas

22.100 General requirement 22.101 Dumping procedures 22.102 Reversing when dumping 22.103 Dump worker 22.104 Track waste dump 22.105 Electrical trolley systems

Division — Raises

22.106 General requirement 22.107 Guarding the bottom of the raise 22.108 Explosives 22.109 Suspended drill platforms 22.110 Raise climbers 22.111 Identification plate 22.112 General brake requirements 22.113 Electrically powered raise climbers 22.114 Brake components 22.115 Guarding 22.116 Controls 22.117 Electric equipment 22.118 Work platforms 22.119 Prohibition 22.120 Safety factor 22.121 Bolts 22.122 Racks and pinions 22.123 Repealed 22.124 Communication 22.125 Inspection before use 22.126 Limits and travel stops 22.127 Equipment maintenance 22.128 Operator's duties 22.129 Reporting defects 22.130 Repair requirements 22.131 Emergency procedures 22.132 Maximum load 22.133 Riding restriction 22.134 After blast monitoring 22.135 Transporting material 22.136 Electrical shut off 22.137 Cleaning

Division — Hoists and Shafts

22.138 General requirement 22.139 Shaft openings 22.140 Access ways 22.141 Repealed

Division — Large Diameter Holes

22.142 General requirement 22.143 Vertical holes 22.144 Limiting descent 22.145 Water in the hole 22.146 Horizontal holes

Division — Gassy Underground Workings

22.147 Written notice 22.148 Worker instruction 22.149 Atmospheric testing 22.150 Automatic alarm 22.151 Ventilation 22.152 Ventilation malfunction 22.153 Air velocity 22.154 No smoking 22.155 Welding and burning 22.156 Prohibited metals 22.157 Flame arresters 22.158 Mechanical excavators 22.159 Fire resistant fluids 22.160 Combustible dusts

Part 23 — Oil and Gas

23.1 Definitions

Division — General Requirements

23.2 Application 23.3 Repealed 23.4 Coordination of multi-employer workplaces 23.5 Safe work procedures 23.6 Control of static electricity 23.7 Fire hazards 23.8 Control of ignition sources 23.9 Flare pits and flare lines 23.10 Fire extinguishers 23.11 Air operating systems 23.12 Pipelines, fittings and valves 23.13 Hose connections 23.14 Pumps 23.15-23.16 Repealed 23.17 Pipe racks 23.18 Handling pipe 23.19 Kelly hose and safety lines 23.20 Catheads 23.21 Rigging up and tearing out 23.22 Driver training 23.23 Steep slopes 23.24 Roads 23.25 Transporting liquids 23.26 Gauging 23.26.1 Liquefied gas used for purging or gauging operations or well stimulation

Division — Geophysical Operations

23.27 Power line and upset hazards 23.28 Seismic drills 23.29 Communications on vehicles 23.30 Repealed

Division — Drilling and Servicing Rigs

23.31 Size of work area 23.32 Inspection and repair 23.33 Rig moves 23.34 List of weights 23.35 Prohibited work areas 23.36 SCBA 23.37 Blowout preventers 23.38 Spudding in 23.39.1 Emergency escape systems 23.39.2 Emergency escape system 1 23.39.3 Emergency escape system 2 23.40 Draw works controls 23.41 Stabbing boards 23.42 Derrick enclosures 23.43 Ventilation openings 23.44 Pits and tanks 23.45 Ladder platforms 23.46 Derrick floor access stairways 23.47 Guardrails 23.48 Hoisting lines 23.49 Travelling blocks 23.50 Hand guards 23.51 Riding hoisting equipment 23.52 Guards 23.53 Crown blocks 23.54 Securing fingers 23.55 Counterweight safety lines 23.56 Weight indicators 23.57 Brakes 23.58 Drill pipes, collars and tubing 23.59 Mud cans 23.60 Rotary tongs 23.61 Rotary table 23.62 Fuel storage 23.63 Guylines

Division — Drill Stem Testing, Swabbing, Cementing, Well Servicing and Stimulation

23.64 General requirements 23.64.1 Snubbing operations 23.65 Swabbing at night 23.66 Gauging 23.67 Disposal of fluids 23.68 Air intake and exhaust 23.69 Flow piping systems — integrity assurance program 23.69.1 Flow piping systems — selection, installation and operation 23.69.2 Flow piping systems — restraint systems 23.69.3 Flow piping systems — other requirements 23.70 Piping, hoses and valves 23.71 High risk fluids 23.72 Pressure testing requirements 23.73 Hot oiling 23.74 Bonding and grounding

Division — Production and Plant Operations

23.75 Preventing ignition 23.76 Blanking of lines 23.77 Retaining walls and diked areas 23.78 Truck loading and unloading 23.79 Pressure relief 23.80 Venting of trucks 23.81 Wrenches

Division — Cleaning and Repairing Tanks or Vessels

23.82 Inerting 23.83 Safety harnesses 23.84 Welding precautions 23.85 Openings 23.86 Electrical equipment 23.87 Repealed

Division — Gas Sample Containers

23.88 Standards 23.89 Safe practices

Part 24 — Diving, Fishing and Other Marine Operations

24.1 Definitions

Division — Wharves, Docks and Mooring Floats

24.2 Ladders 24.3 Lifesaving equipment 24.4 Curbs, bullrails, guardrails and barriers 24.5 Markings 24.6 Rescue boat

Division — Diving OperationsGeneral Requirements

24.7 Application 24.8 Repealed 24.9 Notice of project 24.10 Medical certification 24.11 Diver's fitness 24.12 Training 24.13 Evidence of competency 24.14 Diving logs 24.15 Dive site equipment 24.16 Lifelines 24.17 Safe diving procedures 24.18 Diving supervisor's worksite duties 24.19 Crew briefing 24.20 Diver's responsibilities 24.21 Diving tables 24.22 Decompression procedures 24.23 Diver care and transportation 24.24 Medical alert tag 24.25 Hyperbaric chambers 24.26 Breathing mediums 24.27 Breathing apparatus 24.28 Compressor intake 24.29 Gauges and meters 24.30 Warning devices 24.31 Rescue boat 24.32 Hoists 24.33 Standby diver 24.34 Incident investigation reports

Division — Scuba Diving

24.35 Communication 24.36 Minimum crew 24.37 Restrictions on scuba 24.38 Equipment 24.39 Testing cylinders

Division — Surface Supply Diving

24.40 Minimum crew 24.41 Diver's tender 24.42 Diver's equipment 24.43 Compressors 24.44 Volume tanks 24.45 Breathing air filters 24.46 Manifolds and fittings 24.47 Breathing gas lines

Division — Deep Diving

24.48 General requirements 24.49 Hyperbaric chamber 24.50 Transportation to the underwater worksite 24.51 Rest periods

Division — Submersible Compression Chambers (SCC) and Lock-Out Submersibles (LOS)

24.52 Standards 24.53 General equipment requirements 24.54 Design 24.55 Lifting gear 24.56 Secondary lifting equipment 24.57 Diving system procedures

Division — Atmospheric Diving Systems (ADS)

24.58 Registration 24.59 General equipment requirements 24.60 Secondary means of surfacing 24.61 Secondary lifting equipment

Division — Altitude Diving

24.62 General procedures

Division — Specific Diving Hazards

24.63 Hazardous mechanisms 24.64 Intakes, pipes and tunnels 24.65 Exceptional hazards 24.66 Contaminated environments

Division — Live Boating

24.67 General requirements 24.68 Procedures

Division — Fishing Operations General Requirements

24.69 Application 24.70 Compliance with standards 24.71 Owner and master responsibilities 24.72 Documentation 24.73 Instruction 24.74 Emergency procedures 24.75 Crewmember responsibility 24.76 Vessel preparation 24.77 Reporting injuries 24.78 Unsafe conditions 24.79 Repealed 24.80 Slipping and tripping hazards 24.81 Guarding of equipment 24.82 Inspection of rigging 24.83 Access and egress 24.84 Protection from falling 24.85 Deck openings 24.86 De-energization 24.87 Equipment control devices 24.88 Braking devices 24.89 Illumination 24.90 Ventilation 24.91 Propane installations 24.92 Galley requirements 24.93 Requirements for sensors and alarms 24.94-24.95 Repealed 24.96 Protection against cold 24.96.1 When crewmember must wear a personal flotation device (PFD) or lifejacket 24.96.2 Crewmember working alone 24.96.3 Record of inspection and maintenance 24.97 Crewmember overboard 24.98 Davits 24.99 Communication 24.100 Ozone generators 24.101 Loading and offloading 24.102 Work areas and operations 24.103 Proper lifting

Division — Requirements for Specific Fishing Operations Gillnetting Salmon

24.104 Drums 24.105 Pin rollers

Division — Herring

24.106 Work areas and safeguarding 24.107 Fouled propellers 24.108 Hauling net anchors 24.109 Brailers 24.110 Towing skiffs

Division — Handlining

24.111 Gloves

Division — Longlining

24.112 Setting procedures 24.113 Knives 24.114 Guarding 24.115 Hoisting device

Division — Seining General Requirements

24.116 Hairpins and ringstrippers 24.117 Spooling gear 24.118 Lifting the bag 24.119 Drum operation 24.120 Brailing 24.121 Purse rings 24.122 Pumps 24.123 Drying up 24.124 Power blocks

Division — Seine Skiffs

24.125 Communication 24.126 Skiff design 24.127 Equipment stowage 24.128 Repealed 24.129 Engine exhaust 24.130 Capsize protection

Division — Beachline Operations

24.131 Instruction 24.132 Tie-up sites 24.133 Personal protective equipment 24.134 Night operations

Division — Trap Fishing

24.135 Master's responsibility 24.136 Securing traps 24.137 Lifelines

Division — Trawling

24.138 Safe work procedures 24.139 Securing areas and equipment 24.140 Splitting straps

Division — Trolling

24.141 Trolling poles 24.142 Gurdy brakes 24.143 Cockpit covers Schedule 8

Part 26 — Forestry Operations and Similar Activities

26.1 Definitions

Division — General Requirements

26.1.1 Prime contractor requirements for forestry operations 26.1.2 Multiple-employer workplace 26.2 Planning and conducting a forestry operation 26.2.1 Planning and conducting activities involving trees other than a forestry operation or tree-climbing activities 26.3 Training 26.3.1 Forestry operation fire fighting 26.4 Notice of project 26.5 Initial safety meeting 26.6 Repealed 26.7 Highly visible clothing 26.7.1 Climbing equipment 26.7.2 Weather conditions 26.8 Cutting cables 26.9 Repealed 26.10 Metal in saw logs 26.11 Dangerous trees 26.12 Repealed

Division — Tree-Climbing Activities

26.12.0.1 Application 26.12.0.2 Requirements respecting tree-climbing activities 26.12.0.3 Tree-climbing plan 26.12.0.4 Tree-climbing procedures 26.12.0.5 Rescue 26.12.0.6 Tree-climbing equipment

Division — Equipment Operation

26.12.1 Equipment capabilities 26.12.2 Radio controlled equipment 26.13 Non-slip floors and controls 26.13.1 Equipment operator protections 26.13.2 Maintaining operator vision 26.13.3 Mobile yarders 26.13.4 Saw chain shot 26.14 Repealed 26.14.1 Hazard area of logging equipment 26.14.2 Designated safe work area 26.14.3 Traffic control 26.15 Repealed 26.16 Slope limitations 26.17 Repealed 26.17.1 Brakes 26.18 Landslides 26.19-26.20 Repealed

Division — Manual Falling and Bucking

26.20.1 Application 26.21 Faller qualifications 26.22 Forestry operation faller training 26.22.1 Falling supervisors for forestry operations 26.23 Procedures for falling and bucking 26.24 Responsibility for falling and bucking 26.25 Dangerous trees and logs 26.26 Falling dangerous trees 26.27 Location of fallers 26.28 Summoning assistance 26.29 Entry to falling area

Division — Mechanical Falling

26.29.1 Application 26.29.2 Limits on use of mechanical harvester 26.29.3 Incomplete falling cuts 26.29.4 Hazard area 26.29.5 No additional hazards

Division — Traffic Control for Falling Operations

26.30 Traffic control

Division — Yarding

26.31 Repealed 26.32-26.33 Repealed 26.33.1 Application 26.34 Signalling 26.35-26.37 Repealed 26.38 Riding on rigging 26.39 Safe location 26.39.1 Removal of potential hazards to rigging 26.40 Anchors 26.41 Guylines 26.42 Rigging 26.43 Supporting blocks 26.44 Winches 26.45 Prohibition of knots 26.46 Skyline anchors 26.47 Skyline extensions 26.48 Skyline spars 26.49 Skyline rigging 26.50 Backspar guylines 26.51 Lift trees 26.52 Repealed

Division — Skidding

26.53 Ground skidding operations 26.54 Repealed 26.54.1 Damaged sweep arm 26.55 Mainline release

Division — Forestry Work Areas

26.56 Work area arrangement 26.57-26.58 Repealed 26.59 Suspended logs 26.60 Repealed 26.61 Vehicle movements 26.62 Repealed 26.63 Unauthorized persons

Division — Hauling

26.64 Bunk and stake assemblies 26.65 Cab guard 26.66 Bunks and stakes 26.67 Loading logs 26.68 Securing log loads — general 26.68.1 Securing log loads — highways and mixed transportation routes 26.68.2 Securing log loads — entirely off-highway transportation routes 26.69 Removing wrappers and tiedowns and releasing stakes 26.70-26.71 Repealed 26.71.1 Operating procedures 26.71.2 Daily log 26.72 Warning devices 26.73-26.75 Repealed 26.76 Securing trailers 26.77 Repealed 26.78 Transporting workers

Division — Roads and Road Maintenance

26.79 Haul road standards 26.80 Creating additional hazards 26.81 Bull rails 26.82 Roadside hazards 26.83 Traffic control systems 26.83.1 Radio traffic control 26.84 Weigh scales

Division — Water Operations

26.85 Condition of boats 26.86 Boat equipment 26.87 Boat size 26.88 Overloading 26.89 Presence of operator 26.90 Wind and sea conditions 26.91 Hand signals 26.92 Repealed 26.93 General requirements for booming 26.94 Rigging 26.95 Winches 26.96 Manual boom stripping 26.97 Repealed 26.98 Dumping log bundles 26.99 Repealed

Part 27 — Wood Products Manufacturing

27.1 Application

Division — General Requirements

27.2 Protection from flying debris 27.3 Kickback and kickout protection 27.4 Pressure rolls 27.5 Crossing green chains and decks 27.6 Lumber package rollcase access 27.7 Mechanical handlers 27.8 Veneer clippers 27.9 Kilns 27.10 Personnel hoists 27.11 Hidden hazards 27.12 Communication 27.13 Water operations

Division — Saws and Knives

27.14 Unattended machinery 27.15 Sharpening saws and knives 27.16 Babbitt melting 27.17 Sharp-edged tools 27.18 Circular saw guarding 27.19 Band saw guarding 27.20 Slasher and trim saws 27.21 Circular cutoff saws 27.22 Splitters 27.23 Chop, trim and swing cutoff saws 27.24 Circular saw guides 27.25 Cutoff saw interlocks 27.26 Saw operator location 27.27 Repealed 27.28 Saw maintenance 27.29 Cracks in circular saws 27.30 Cracks in band saws 27.31 Band saw wheel wear limits

Division — Log Handling

27.32 Log-haul walkways 27.33 Log hauling equipment 27.34 Rolling logs 27.35 Barker feed restraints 27.36 Bundle breaking

Division — Headrigs

27.37 Buffer stops 27.38 Locking control levers 27.39 Carriage track barriers 27.40 Preventing contact

Division — Chippers, Hogs and Planers

27.41 Hog and chipper chutes 27.42 Hogs, chippers and cutting heads

Division — Materials Handling

27.43 Height of chip and sawdust piles 27.44 Wood products storage

Division — Shake and Shingle Mills

27.45 Shake splitters and cubers 27.46 Block size and pile height 27.47 Shingle saws 27.48 Shake resaw arm guards 27.49 Clipper saw guards 27.50 Clipper saw brakes 27.51 Treadle controls 27.52 Set works and reciprocating parts 27.53 Carriage speed 27.54 Saw diameter 27.55 Unattended machines

Part 28 — Agriculture

28.1 Definitions 28.2 Application

Division 1 — General Conditions

28.3 Cold storage rooms 28.4 Bridges and culverts 28.5 Barriers for manure pits 28.6 Instruction of seasonal, temporary and other workers 28.6.1 Rollover risk 28.7 Animal handling 28.8 Indoor air quality exception 28.9 Control of environmental tobacco smoke and e-cigarette vapour exception 28.10 Drinking water

Division 2 — Hazardous Substances

28.11 Personal hygiene 28.12 Repealed 28.13 Anhydrous ammonia 28.14 Ventilation of buildings near manure tanks

Division 3 — Personal Protective Equipment

28.15 Horseback riding exception

Division 4 — Equipment

28.16 Warning signs for power take-off devices 28.17 Signs and procedures for equipment guarding 28.18 Hay balers 28.19 Round balers 28.20 Post-hole diggers 28.21 Post drivers 28.22 Chain saws exception 28.23 Hand winch for auger conveyors 28.24 Alternative means of evaluation for automotive lifts and vehicle supports 28.25 Orchard ladders exception 28.26 Orchard ladders design 28.27 Orchard ladders instructions and use 28.28 Previously installed fixed ladders exception 28.29 Small cranes and hoists exception 28.30 Altered application dates for cranes and hoists 28.31 Alternative requirements for rigging identification 28.32 Evaluation of a rigging device 28.33-28.42 Repealed 28.43 General requirements for mobile elevating work platforms 28.44 Mobile elevating work platform design standards 28.45 Identification on mobile elevating work platforms 28.46 Fall protection exception 28.47 Annual inspection and certification exception 28.48 Operational devices exception 28.49 Repealed 28.50 Transportation of workers

Part 29 — Aircraft Operations

29.1 Repealed

Division — General Requirements

29.2 Application 29.3 Pre-job planning and training 29.4 Repealed 29.5 Communications 29.6-29.8 Repealed 29.9 Airlifted loads 29.10 Traffic control 29.11 Rotorwash 29.12 Unstable materials 29.13-29.15 Repealed

Division — Forestry Operations

29.16 Notification 29.17 Site supervision 29.18-29.19 Repealed 29.20 Log loading areas

Division — Pesticide Application

29.21-29.22 Repealed 29.23 Flagpersons

Part 30 — Laboratories

30.1 Definition 30.1.1 Application

Division — General Requirements

30.2 Equipment operation 30.3 Repealed 30.4 Plumbing 30.5 Fire protection 30.6 Guarding 30.7 Equipment ventilation 30.7.1 Definitions 30.8 Fume hoods 30.9 Airflow and containment monitoring 30.10 Ducting 30.11 Exhaust discharge 30.12 Biological safety cabinets 30.13 Centrifuges 30.14 Procedures 30.15 Permitted quantities 30.16 Transport of containers 30.17 Personal protection 30.18 Spills and other emergencies 30.19 Waste disposal

Division — Specific Substances and Procedures

30.20 Explosive and highly reactive materials 30.21 Perchloric acid 30.22 Picric acid 30.23 Peroxide-forming compounds 30.24 Cryogenic liquids 30.25 Sharps 30.26 Biological agents and human pathogens 30.27 Animal handling 30.28 Microtomes 30.29 Electrophoresis

Part 31 — Firefighting

31.1 Definitions 31.2 Application

Division — General Requirements

31.3 Health and safety committee 31.4 Instruction and direction 31.5 Procedures 31.6 Rest and rehabilitation 31.7 Impounding equipment 31.8 Equipment defects 31.9 Test records

Division — Personal Protective Clothing and Equipment

31.10 General requirement 31.11 Maintenance 31.12 Firefighter responsibility 31.13 Safety headgear 31.14 Protective coats, pants and hoods 31.15 Stationwear and personal garments 31.16 Working gloves 31.17 Fall protection 31.18 Personal alert safety system

Division — Respiratory Protection

31.19 General 31.20 Fitness to use SCBA 31.21 Operation of SCBA 31.22 Sealing and fit testing 31.23 Entry into buildings 31.24 Air quality and sampling 31.25 Spare equipment 31.26 Maintenance and records

Division — Transportation

31.27 Seating 31.28 Communication 31.29 Enclosed crew cabs 31.30-31.31 Repealed 31.32 Vehicle exhaust in firehalls

Division — Aerial Devices and Ground Ladders

31.33 General 31.34 Inspection and testing 31.35 Controls 31.36 Operator location 31.37 Ground ladders

Division — Other Equipment

31.38 Flashlights and hand lanterns 31.39 Plaster hooks and pike poles

Part 32 — Evacuation and Rescue

32.1 Repealed 32.2 Training 32.3 Equipment 32.4 Ropes 32.5 Inspection of equipment 32.6 Maintenance records 32.7 First aid 32.8 Communications 32.9 Work areas over water

Part 33

33.1-33.52 Repealed

Part 34 — Rope Access

34.1 Definitions 34.2 Scope of application 34.3 Rope access plan 34.4 Training and certification 34.5 Safe work practices 34.6 Two-rope system 34.7 Personal log 34.8 Rescue 34.9 Equipment 34.10 Inspection and maintenance 34.11 Anchors and anchorages 34.12 Permanent anchors 34.13 Temporary anchors 34.14 Safety headgear 34.15 Maximum arrest force, clearance 34.16 Removal from service Schedule 34-A Schedule 34-A Schedules 1 to 7 Schedules 1 to 7