Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 20.25

Concrete placing hazards

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 20.25 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) The employer must ensure that protruding objects that create a risk of injury are removed or effectively guarded. (2) During placement of concrete or other significant loads on the formwork, a person must be restricted from the areas underneath where the loads are placed. (3) After placement of concrete or other significant loads on the formwork, a person must be restricted from the areas underneath where the loads were placed until it can be confirmed by a qualified person that the formwork is withstanding the loads. (4) Placement of concrete or other loads (a) must stop if any of the following occurs: (i) weakness; (ii) undue settlement; (iii) excess distortion of specified formwork or any associated falsework or reshoring; (iv) an unanticipated or dangerous condition not set out in subparagraph (i), (ii) or (iii), and (b) may restart only after the formwork, falsework or reshoring has been repaired or strengthened as specified by a professional engineer. (5) Loads must not be applied to uncured concrete structures except as permitted by the worksite-specific plans.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.