Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 8.11

General requirement

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 8.11 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Before a worker starts a work assignment in a work area where there is a risk of head injury to the worker from falling, flying or thrown objects, or other harmful contacts, the employer must take measures to (a) eliminate the risk, or (b) if it is not practicable to eliminate the risk, minimize the risk to the lowest level practicable by applying the following control measures in order of priority: (i) engineering controls; (ii) administrative controls; (iii) requiring the worker to wear safety headgear. (2) Safety headgear must meet the requirements of one of the following standards: (a) CSA Standard CAN/CSA-Z94.1-05 or CAN/CSA-Z94.1-15, Industrial protective headwear — Performance, selection, care, and use; (b) ANSI Standard ANSI/ISEA Z89.1-2009 or ANSI/ISEA Z89.1-2014, American National Standard for Industrial Head Protection. (3) If a worker may be exposed to an electrical hazard the safety headgear must have an appropriate non-conductive rating. (4) Chin straps or other effective means of retention must be used on safety headgear when workers are climbing or working from a height exceeding 3 m (10 ft), or are exposed to high winds or other conditions that may cause loss of the headgear. (5) Repealed. [B.C. Reg. 381/2004, s. 3.] (6) Damaged headgear or headgear with missing, mismatched, or modified components must be removed from service.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.