Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 16.40

ATVs

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 16.40 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) An ATV must meet and be used in accordance with ANSI Standard SVIA-1 2017, American National Standard for Four Wheel All-Terrain Vehicles or the earlier version of the standard that applied on the date of manufacture of the ATV. (2) An ATV must be used in accordance with the manufacturer's instructions. (3) The manufacturer's instructions for an ATV must be kept in a secure place with the ATV or at another location readily accessible to the operator. (4) If the manufacturer's instructions do not include limits for the operation of the ATV on sloping ground, 5% is the maximum allowable slope unless the employer has developed and implemented written safe work procedures appropriate for any steeper slope on which the mobile equipment is to be used. (5) The training program for an ATV operator must include training by a qualified person for the following: (a) operating skills, according to the ATV manufacturer's instructions; (b) the ATV operator's pre-operational inspection; (c) basic mechanical requirements; (d) loading and unloading the ATV for transport, if a job requirement. (6) Loading and unloading an ATV onto or off a carrier vehicle must be done in a safe manner. (7) If ramps are used when loading or unloading an ATV, they must be secured at a suitable angle, be sufficiently wide and have a surface finish that provides an adequate grip for the tires of the ATV. (8) A modification or attachment to an ATV that may affect its stability must be certified by the manufacturer or a professional engineer.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.