Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 5.51

Additive effects

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 5.51 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

If there is exposure to a mixture of 2 or more substances with established exposure limits which exhibit similar toxicological effects, the effects of such exposure must be considered additive unless it is known otherwise, and the additive exposure must not exceed 100% when calculated as follows: AE = %EL1 + %EL2 + ...%ELn where (a) AE is the calculated additive exposure to the mixture, (b) % EL1 is the measured exposure to component 1 of the mixture expressed as a percentage of its exposure limit, (c) %EL2 is the measured exposure to component 2 of the mixture expressed as a percentage of its exposure limit, and (d) %ELn is the measured exposure to any additional components of the mixture expressed as a percentage of their respective exposure limits.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.