Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 6.112
Risk assessment
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 6.112 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) In this section, “existing monitoring data” means data
(a) gathered under section 5.53 or 6.112.3, or
(b) as described in section 6.112.4 (2) (b).
(2) An employer must not permit workers to engage in a work activity or a silica process that may expose workers to RCS dust unless a risk assessment has first been completed by a qualified person.
(3) The risk assessment must include consideration of all of the following:
(a) the hazards of RCS dust, including the exposure limit;
(b) any information contained on a label or in a safety data sheet provided by a supplier, manufacturer or employer in respect of
(i) the crystalline silica content in the materials to be used in the silica process, and
(ii) the health effects of RCS dust exposure;
(c) the scope, circumstances and nature of the work activity or silica process, including
(i) whether section 5.50 applies, given the length of a shift,
(ii) any changes between shifts in the scope, circumstances or nature of the work activity or silica process, and
(iii) the potential level and duration of exposure to RCS dust during the work activity or while engaging in the silica process;
(d) the effectiveness of existing and planned control measures, as determined through exposure monitoring, to prevent or minimize worker exposure to RCS dust, including with respect to access to the workplace by unprotected workers;
(e) any additional information the employer needs to complete the risk assessment.
(4) A qualified person may rely on existing monitoring data for the purpose of assessing control measures under subsection (3) (d) only if it is reasonable to do so based on
(a) the relevance of the existing monitoring data, and
(b) whether additional air monitoring may be needed to reassess the effectiveness of existing and planned control measures because of changes in personnel or to the scope, circumstances or nature of the work activity or silica process.
(5) An employer must ensure that the risk assessment is reviewed by a qualified person if any of the following occur:
(a) there is reason to believe the risk assessment is no longer valid;
(b) there has been a significant change in the scope, nature or circumstances of the work activity or silica process to which the risk assessment relates;
(c) the results of any exposure monitoring show it to be necessary.
(6) If changes to the risk assessment are necessary as a result of the review under subsection (5), the employer must ensure that the risk assessment is changed accordingly.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.