Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 20.85
Trench support structures
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 20.85 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Trench support structures, other than those designed by a professional engineer, must comply with Table 20-1 for the following relevant soil conditions: Soil type Description of soil A
B
C hard and solid
likely to crack or crumble
soft, sandy, filled or loose
(2) If Table 20-1 is to be used for a combination of supporting and sloping, the selection of shoring elements must be based on the overall depth of the excavation and the arrangement must conform to Figure 20-3.
(3) Cross braces and trench jacks must be installed in a horizontal position and must be secured against dislodgment.
(4) The minimum number of cross braces at each cross bracing location is determined by the trench depth as follows: Depth at location Number of braces up to 2.4 m (8 ft)
2.4 m to 3.7 m (8 ft to 12 ft)
3.7 m to 4.6 m (12 ft to 15 ft)
4.6 m to 6 m (15 ft to 20 ft) 2
3
4
5
(5) At each cross bracing location the cross braces must be less than 1.2 m (4 ft) apart, and the uppermost cross brace must be within 60 cm (2 ft) of ground level.
(6) Repealed. [B.C. Reg. 312/2003, App. B, s. 43.]
(7) Hydraulic or pneumatic trench jacks must have a means of ensuring that they will not collapse in the event of loss of internal pressure.
(8) Uprights must not spread outwards more than 15 degrees from the vertical when viewed along the trench.
(9) Plywood may be substituted for two inch thick shoring elements provided that
(a) the plywood is not less than 19 mm (3/4 in) thick,
(b) the trench is not over 2.7 m (9 ft) in depth,
(c) uprights are installed at not over 60 cm (2 ft) centres,
(d) cross braces do not bear directly on plywood, and
(e) cross braces bearing on uprights or walers are located at all joints in plywood sheathing.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.