Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 14.72
Boom inspection
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 14.72 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) A crane boom used with a vibratory hammer for driving piles must be inspected at least once every 3 months in accordance with good engineering practice to ensure it meets
(a) the crane boom manufacturer's specifications,
(b) the requirements of the applicable design or safety standard specified in section 14.2, and
(c) the requirements of this Regulation.
(2) A crane boom used with a vibratory pile extractor or with a drop hammer or used for dynamic compaction must be inspected at least once a month in accordance with good engineering practice to ensure it meets
(a) the crane boom manufacturer's specifications,
(b) the requirements of the applicable design or safety standard specified in section 14.2, and
(c) the requirements of this Regulation.
(3) A boom must not be used after an inspection under subsection (1) or (2) unless a professional engineer certifies it is safe for use on the basis of that inspection.
(4) A crane used in any operation described in subsection (1) or (2) must not be returned to lifting service unless a professional engineer inspects the crane and certifies that it is safe for such use.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.