Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 4.3

Safe machinery and equipment

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 4.3 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) The employer must ensure that each tool, machine and piece of equipment in the workplace is (a) capable of safely performing the functions for which it is used, and (b) selected, used and operated in accordance with (i) the manufacturer's instructions, if available, (ii) safe work practices, and (iii) the requirements of this Regulation. (2) Unless otherwise specified by this Regulation, the installation, inspection, testing, repair and maintenance of a tool, machine or piece of equipment must be carried out (a) in accordance with the manufacturer's instructions and any standard the tool, machine or piece of equipment is required to meet, or (b) as specified by a professional engineer. (3) A tool, machine or piece of equipment determined to be unsafe for use must be identified in a manner which will ensure it is not inadvertently returned to service until it is made safe for use. (4) Unless otherwise specified by this Regulation, any modification of a tool, machine or piece of equipment must be carried out in accordance with (a) the manufacturer's instructions, if available, (b) safe work practices, and (c) the requirements of this Regulation.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.