Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 27.42

Hogs, chippers and cutting heads

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 27.42 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Until the rotor has stopped turning, no attempt must be made to remove a guard, hood, shroud or inspection plate from a hog, chipper, or cutter head. (2) A makeshift device that may cause injury to a worker must not be used to brake or slow down a rotor or cutter head. (3) A mill chipper with a shroud, hood or inspection plate that can be removed before the rotor has stopped must have an effective brake. (4) Subsection (3) does not apply to a whole log chipper. (5) A hog or chipper must have a means of determining if rotating parts are in motion or have stopped. (6) A production planer installed after January 1, 1999 must be equipped with brakes on the heads, and all production planers must have brakes on the heads by January 1, 2000.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.