Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 12.96
Inspection of materials
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 12.96 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Material to be put in a melting furnace must be carefully inspected to ensure that a cylinder, tank or similar closed vessel of any description is not placed in the furnace.
(2) Before being exposed to the intense heat of a furnace, a closed vessel must be cut open to eliminate the explosion hazard, but must not be cut open using a method involving the application of heat or flame.
(3) If a worker must be situated near an open furnace during charging operations, the material to be melted must be carefully examined and, if necessary, must be sufficiently preheated to ensure that moisture and foreign substances are eliminated.
(4) Preheating must be done under controlled circumstances to ensure that no worker is endangered by the process.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.