Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 19.24.1

Minimum approach distance when working close to exposed electrical equipment and conductors

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 19.24.1 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Subject to section 19.24.2, or unless otherwise permitted by this Part, if exposed electrical equipment or conductors at a workplace have a voltage within a range set out in column 1 of Table 19-1A, the following must remain at least the distance from the exposed electrical equipment and conductors that is set out in column 2 opposite that range of voltage: (a) a person working at the workplace; (b) a tool, a machine, material or equipment at the workplace. (2) If practicable, an employer must ensure that a tower crane operating at a workplace that has exposed electrical equipment or conductors that have a voltage within a range set out in column 1 of Table 19-1A is equipped with a zone-limiting device that prevents the crane from operating in the relevant minimum approach distance to the exposed electrical equipment or conductors set out opposite in column 2. Table 19-1A Column 1 Voltage Column 2 Minimum approach distance when working close to exposed electrical equipment or conductors Phase to phase Metres Feet Over 750 V to 75 kV 3 10 Over 75 kV to 250 kV 4.5 15 Over 250 kV to 550 kV 6 20
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.