Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 20.20
Information for worksite-specific plans
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 20.20 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) For the purposes of section 20.18 (b), worksite-specific plans must, subject to subsection (2),
(a) clearly show all the information necessary to accurately and safely erect, use and, if applicable, dismantle formwork, falsework and reshoring, and
(b) include the following information:
(i) sufficient plan view, section views and connection details, enlarged where necessary, to clearly describe the formwork, falsework and reshoring and permit accurate erection;
(ii) the quality and grade of materials to be used for the components and their connection;
(iii) an accurate description of proprietary items, including fittings, to permit field identification;
(iv) the load bearing capacity required of the material upon which sills are to be placed and, if necessary, details of procedures to be used to develop and maintain the required capacity;
(v) the minimum dimensions of sills and other foundation members;
(vi) erection, use and dismantling procedures that require special attention including, where applicable, handling multi-use formwork panels;
(vii) details of supports necessary to maintain lateral stability and resist sidesway and racking, specifying the materials, dimensions and locations of external braces, ties and other support devices;
(viii) if structural components connect together, the connection details necessary to prevent accidental displacement or rotation of the components;
(ix) details of the form or mould into which concrete will be placed;
(x) the maximum concrete slump that the form or mould is able to withstand;
(xi) sufficient load and deflection information to permit a professional engineer to understand the design of the formwork and falsework;
(xii) the sequence, method and rate of load placement necessary to prevent overloading of any part of the formwork or falsework.
(2) If any information cannot be provided to meet the requirements of subsection (1), worksite-specific plans must include special notation of the information that is incomplete and that will require further design.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.