Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 21.72

Electrical blasting

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 21.72 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

After a blast is electrically initiated the blaster must not enter the blast site until (a) the blaster has disconnected the firing lines from the initiating device and has shunted the lead wires, or (b) if the blast was initiated from a power line, the blaster has disconnected the firing lines and locked the switch open.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.