Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 8.21
Leg protection
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 8.21 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Leg protective devices must be worn by a worker operating a chain saw.
(2) Leg protective devices referred to in subsection (1) must meet or exceed
(a) the general requirements of section 4 of the WorkSafeBC Standard — Leg Protective Devices, as set out in Schedule 8-A of this Part, and
(b) the performance requirements of one of the following standards, using the cut-resistance testing protocol set out in that standard except as varied in subparagraph (ii):
(i) WorkSafeBC Standard — Leg Protective Devices, as set out in section 5 of Schedule 8-A of this Part, applying a threshold chain speed of 18.3 metres per second or 3 600 feet per minute;
(ii) ASTM F 1414-04 Standard Test Method for Measurement of Cut Resistance to Chain Saw in Lower Body (Legs) Protective Clothing, but applying a threshold chain speed of 16.8 metres per second or 3 300 feet per minute;
(iii) ISO 11393-2 Protective clothing for users of hand-held chain-saws — Part 2: Test methods and performance requirements for leg protectors, applying a Class 2 threshold chain speed of 24 metres per second or 4 724 feet per minute;
(iv) BS EN 381-5: 1995 Protective clothing for users of hand-held chain saws — Part 5: Requirements for leg protectors, applying a Class 2 threshold chain speed of 24 metres per second or 4 724 feet per minute.
(3) A leg protective device worn by a worker must have a label that
(a) is permanently affixed,
(b) uses lettering that is at least 6 mm (1/4 in.) high, and
(c) clearly indicates all of the following information:
(i) the name or trademark of the manufacturer;
(ii) the standard met or exceeded under subsection (2) (a);
(iii) the standard met or exceeded under subsection (2) (b);
(iv) the year of manufacture of the device unless otherwise marked on the device.
(4) The requirement to wear leg protective devices does not apply to a firefighter using a chain saw at the scene of a structural fire.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.