Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 26.12.0.4

Tree-climbing procedures

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 26.12.0.4 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

A qualified arborist or trainee arborist engaging in tree-climbing activities must (a) assess and determine that each anchor point or other point of securement is suitable for the loads to be imposed on it before using it, (b) ensure each climbing line of the tree-climbing system (i) uses at least one anchor point or other point of securement in the tree, (ii) uses independent anchor points or other points of securement, if practicable, and (iii) is positioned at each anchor point or other point of securement in such a way that the climbing line will not move away from, though the climbing line may slide through, the anchor point or other point of securement, (c) position the tree-climbing system in a manner that minimizes the risk of the qualified arborist or trainee arborist falling and colliding with an object while swinging on a climbing line in a pendulum-like motion, (d) tie a stopper knot at the end of each climbing line of the tree-climbing system, (e) before accessing the tree, be secured to the tree by the tree-climbing system and remain secured until the work is completed and the qualified arborist or trainee arborist has returned to the ground, (f) operate a cutting tool only when tied into the tree with (i) a climbing line or lanyard, and (ii) a second means of securement, such as another climbing line or lanyard, and (g) engage in the tree-climbing activities in accordance with the parts of the tree-climbing plan described in section 26.12.0.3 (1) (a) (ii) and (b) (i), (ii) and (v).
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.