Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 10.3
When lockout required
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 10.3 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) If machinery or equipment is shut down for maintenance, no work may be done until
(a) all parts and attachments have been secured against inadvertent movement,
(b) where the work will expose workers to energy sources, the hazard has been effectively controlled, and
(c) the energy isolating devices have been locked out as required by this Part.
(2) If machinery or equipment is in use for normal production work, subsection (1) applies if a work activity creates a risk of injury to workers from the movement of the machinery or equipment, or exposure to an energy source, and the machinery or equipment is not effectively safeguarded to protect the workers from the risk.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.