Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 16.34
Rollover protective structure (ROPS)
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 16.34 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) In this section, “rollover risk assessment” means an assessment of the risk that mobile equipment will experience a rollover while it is being operated by an on-board operator, based on the relevant circumstances of the proposed operation, including the following:
(a) the stability of the mobile equipment, taking into account such factors as its configuration and any attachments or towed components;
(b) whether the mobile equipment will be operated in a rollover hazard area;
(c) the nature of the activities to be performed.
(2) Mobile equipment must be used with a ROPS unless
(a) the mobile equipment is
(i) a snowmobile, ATV or any other mobile equipment designed for a standing operator or with a straddle seat, or
(ii) a golf cart, or
(b) a qualified person has completed a rollover risk assessment respecting the mobile equipment and determined there is no, or only a minimal, risk of rollover.
(3) A rollover risk assessment and determination referred to in subsection (2) (b) must be in writing if the assessment and determination pertains to one of the following types of mobile equipment:
(a) tractors, dozers, loaders, skidders, trenchers, graders, scrapers, roller-compactors, pipe layers and rough terrain lift trucks;
(b) rock drills operated by a seated on-board operator;
(c) ride-on turf care equipment heavier than 400 kg (882 lbs) manufactured after September 1, 2021;
(d) UTVs manufactured after September 1, 2021;
(e) excavators manufactured after September 1, 2021 and used in a rollover hazard area.
(4) The written risk assessment and determination referred to in subsection (3) must be available at the worksite.
(5) The Board may require a ROPS to be installed on any mobile equipment if the design of the mobile equipment or circumstances of use indicate the need.
(6) A ROPS must be designed and installed so that it does not obstruct the operator's view or ability to operate the mobile equipment safely.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.