Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 14.28
Controls
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 14.28 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Each control for a crane or hoist must have its function clearly identified and must be maintained in good condition.
(2) Each control for a crane or hoist that causes load movement must return to neutral when pressure from the operator is released.
(3) Subsection (2) does not apply to a crane or hoist manufactured before January 1, 2000 for which continuous pressure controls were not previously required.
(4) Each control for a crane or hoist must be located to allow safe operation of the equipment and if the control is not located in a cab it must be located to provide a safe distance between the operator and the load being handled.
(5) A pendant control for a crane or hoist must be supported independently from its electrical conductors.
(6) A remote control panel for a crane or hoist must be designed to safeguard effectively against the unintended activation of the crane or hoist.
(7) A wireless remote control system for a crane or hoist must incorporate
(a) error checking to prevent the controlled equipment from responding to corrupt data, and
(b) identification coding methods to prevent a transmitter other than the designated transmitter for that crane or hoist from operating the equipment.
(8) A remote control system for a crane or hoist must be designed to ensure the following:
(a) if the power to the remote control system is removed for any reason, all crane or hoist functions stop;
(b) if the control signal for any crane or hoist motion becomes ineffective, the crane or hoist motion stops;
(c) the remote control panel has an operator controlled emergency stop feature that
(i) permits the operator to stop all crane or hoist movement regardless of a malfunction within the remote control system, and
(ii) requires resetting of the emergency stop feature before equipment operation can resume.
(9) A remote control panel for a crane or hoist must be marked to identify the corresponding base control unit to be used with it.
(10) The maximum distance between a remote control panel and the crane or hoist being operated by the remote control system must
(a) not exceed the limit specified by the control system manufacturer, and
(b) be communicated to the operator before the operator uses the crane or hoist.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.