Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 15.6

Design factors

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 15.6 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) The design factors based on breaking strengths for rigging components must be at least equal to the values given in Table 15-1, except as otherwise specified in this Regulation. Table 15-1: Minimum design factors for rigging Item Component Minimum design factor 1 Nylon fibre rope sling 5 2 Polyester rope sling 5 3 Polypropylene rope sling 5 4 Alloy steel chain sling 4 5 Wire rope sling 5 6 Metal mesh sling 5 7 Synthetic web sling 5 8 Synthetic roundsling 5 9 Chain fittings 4 10 Wire rope sling fittings 5 11 Other fittings as specified by manufacturer 12 Non-rotating wire rope as specified by manufacturer but not less than 5 13 Conventional wire rope 5 (2) The design factors specified by subsection (1) may be reduced for a dedicated rigging assembly designed and certified by a professional engineer for a specific lift, but the dedicated assembly must be re-rated according to the requirements of subsection (1) for continued use. (3) The design factor for any rigging assembly used to support workers must be at least 10.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.