Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 23.18
Handling pipe
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 23.18 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Pipes or tubular goods must be restrained from uncontrolled movement.
(2) Deck pins used to restrain pipes must
(a) be at least 45 cm (18 in) high, and extend beyond the centre line of the pipe closest to the pins, or
(b) if the pipe is tiered, extend one pipe diameter above the pipe closest to the pins.
(3) Deck pins are not required if specialized dunnage is used.
(4) Pipes or tubular goods must be adequately secured before restraining devices are removed.
(5) While pipe is being loaded, unloaded or transferred, workers must not be on top of an unsecured load, between the load and the pipe racks or tubs, or in any other area made hazardous by potential pipe movement.
(6) When pipe is being transferred between pipe racks, catwalks, or trucks, temporary supports or skids must be constructed, placed and anchored so that they will support the load placed upon them.
(7) When transferring drill collars, tubular goods or other similar materials which are not provided with shoulders, pick up subs or other appropriate pipe handling equipment must be used.
(8) A nubbin must not be used to pick up drill collars, tubular goods or similar materials unless the nubbin is equipped with a wire rope safety line and swivel for attachment to the elevator bails.
(9) A trailer used as a pipe rack during drilling, servicing or pipe salvaging must have a guard, along the full length of both sides of the trailer, designed and constructed to ensure that when a pipe is hoisted into the derrick, the lower end of the pipe will not roll off the trailer.
(10) Repealed. [B.C. Reg. 258/2008, App. G, s. 2.]
(11) Pipes must be loaded on or unloaded from a truck one layer at a time.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.