Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 10.4

Lockout procedures

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 10.4 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) When lockout of energy isolating devices is required, the devices must be secured in the safe position using locks in accordance with procedures that are made available to all workers who are required to work on the machinery or equipment. (2) The employer must ensure that each worker required to lock out has ready access to sufficient personal locks to implement the required lockout procedure. (3) Combination locks must not be used for lockout. (4) Each personal lock must be marked or tagged to identify the person applying it. (5) Procedures must be implemented for shift or personnel changes, including the orderly transfer of control of locked out energy isolating devices between outgoing and incoming workers. (6) If the use of a personal lock is not practicable for lockout, another effective means, if approved by the Board, may be used in place of a personal lock to secure an energy isolating device in the safe position.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.