Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 27.3

Kickback and kickout protection

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 27.3 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Edgers and other wood processing equipment which expose workers to the danger of material being thrown back by the saws must be fitted with effective kickback fingers, and if the danger remains when the kickback fingers are raised, a substantial barrier must be provided to protect workers. (2) A worker must not be in front of raised kickback fingers while the saw is in motion. (3) A worker must not be allowed at the outfeed end of an edger or other similar wood processing equipment where a kickout hazard exists, and inadvertent entry into such a danger area must be prevented. (4) Edgers equipped with automatically activated kickback fingers must have interlocks to prevent forward motion of the feed rolls while the kickback fingers are in a raised position. (5) Workers must be protected from the kickback or kickout dangers of plywood sanders.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.