Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 27.31

Band saw wheel wear limits

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 27.31 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Unless otherwise specified by the manufacturer or a professional engineer, the minimum rim thickness of a cast steel band saw wheel measured 25 mm (1 in) inboard from the rim edge must be (a) 14 mm (9/16 in) for wheels up to and including 1.8 m (6 ft) diameter, (b) 16 mm (5/8 in) for wheels over 1.8 m (6 ft) up to and including 2.75 m (9 ft) diameter, and (c) 17.5 mm (11/16 in) for wheels over 2.75 m (9 ft) diameter. (2) A band saw wheel over 1.2 m (48 in) diameter must be nondestructively tested for cracks by a qualified person at least once a year. (3) A cracked wheel or a wheel which has been exposed to excessive heat must be removed from service until the wheel manufacturer, or a professional engineer, has certified it as safe for continued use.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.