Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 12.53

Tool design

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 12.53 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Two separate and distinct operations must be required to activate a powder actuated tool and the final firing movement must be separate and subsequent to depressing the tool into the firing position. (2) The tool must be designed so that positive means of varying the power level is available, or can be made available, so that the operator may select a power level appropriate to perform the desired work.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.