Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 6.24
Friction materials
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 6.24 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
If automotive service procedures may involve friction material that is asbestos-containing material or dust arising from such material, the employer must ensure that the following control measures are implemented:
(a) dry removal of friction material dust from automotive assemblies using compressed air, brushes, or other similar means is prohibited;
(b) service work areas where friction material is handled are posted with signs to advise workers of the hazards and required precautions;
(c) suitable work procedures are followed to minimize the generation of airborne dust;
(d) a worker handling equipment or assemblies contaminated with dust from friction material, outside of a HEPA-filtered vacuum enclosure system, wears suitable personal protective equipment, including disposable coveralls and at least a HEPA-filtered dual cartridge half face respirator;
(e) waste material that may be contaminated with asbestos is promptly collected and disposed of in accordance with applicable requirements;
(f) contaminated tools, equipment and work surfaces are cleaned after work is completed.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.