Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 21.1

Definitions

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 21.1 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

In this Part: “blast site” means an area extending at least 15 m (50 ft) in every direction from a place where (a) explosives are stored outside of a magazine or are placed or primed, or (b) a misfire is known or believed to exist; “blaster” means a person who is the holder of a valid blaster's certificate issued by the Board or acceptable to the Board; “blaster of record” means the blaster who is designated to be in charge of a blasting operation; “blasting accessory” means a non-explosive device, product or tool, including a blasting machine, fuse lighter, blasting galvanometer, crimper, powder punch and loading pole; “blasting log” means a written record that contains the information referred to in section 21.4 (1); “blasting operation” includes preparing, placing and firing a charge, handling a misfire and destroying or disposing of explosives; “bootleg” means the remnant of a blast hole which did not properly break when the blast was initiated; also called socket, butt or button; “charge” means an explosive, whether or not the explosive has a primer, that is placed for the purpose of detonation or deflagration; “danger area” means an area in which there may be danger to persons or property from flying material or other hazardous condition resulting from a blasting operation; “dangerous incident” means an accident or near miss occurrence caused by or as a result of the use of explosives, and also includes an unexpected result or problem with explosive products; “day box” means a container used at a worksite to store and transport explosives that is (a) weatherproof, (b) constructed with (i) an outer surface that is made of non-combustible materials, and (ii) an inner surface that is made of non-sparking materials, and (c) equipped with a lock or mechanism to enable locking; “detonator” means any of the following: (a) a device containing a primary explosive that is used for initiating detonation in another explosive; (b) an exploding bridgewire detonator; (c) an exploding foil initiator; (d) a deflagration to detonation transition detonator; “electric detonator” means a detonator, other than an electronic detonator, designed for, and capable of, initiation by means of an electric current, including, for example, a resistorized electric detonator; “electric igniter” means a device designed for, and capable of, initiating deflagration in another explosive by means of an electric current; “electronic detonator” means a detonator that uses stored electrical energy as a means of powering a programmable electronic timing delay element, whether or not the detonator is wireless; “explosive” means a substance, or an item containing a substance, that is made, manufactured or used to produce a detonation or deflagration; “initiating device” means a blasting machine, non-electric starter, fuse lighter and any other device used to initiate a deflagration or detonation but does not include a detonator or electric igniter; “isolated location” means an area where people other than the workers involved in the work project are not likely to be, and excludes frequently travelled roads, or a recreation area when it is likely to be used by people; “magazine” means a licensed magazine within the meaning of the Explosives Act (Canada); “manufacturer-armed perforating gun” means a perforating gun fitted with a detonator if (a) the detonator is fitted by the manufacturer during the manufacture of the gun, and (b) the gun as fitted with the detonator is an authorized explosive within the meaning of the Explosives Act (Canada); “misfire” means a charge, or part of a charge, that failed to completely detonate or deflagrate, as applicable, and includes cutoffs and unexploded explosives in the muckpile or debris, but does not include a mislight; “mislight” means a failure or perceived failure of a pull-wire lighter to ignite the safety fuse assembly; “perforating gun” means a device that (a) is used for perforating an oil and gas well in preparation for production, and (b) contains charges, each of which is shaped to focus the effect of the explosive energy of the charge; “primer” means an explosive to which a detonator is attached or into which a detonator is inserted; “radio frequency transmitter” means an AM, CB, FM and VHF radio, TV, radar, cellular telephone, wireless or remote control device, global positioning system, radio navigational beacon and any other electronic transmitting device that radiates radio frequency waves; “safety fuse assembly” means a manufactured blasting accessory consisting of a precut length of safety fuse, an igniter cord connector and a detonator; “shunt” means the act of closing an electrical circuit to prevent or minimize the potential for an electrical charge or current to unintentionally reach an explosive by (a) using an electrically conductive, non-ferrous clip or foil, (b) twisting together the lead wires or leg wires, (c) using a shorting pin, or (d) using other means recommended by the manufacturer; “springing” means a blasting technique which opens up a pocket at the bottom of a blast hole so that successive larger charges may be loaded and blasted; “stemming” means placing inert material in the portion between the top of the explosive column and the collar of a blast hole, intended to confine the explosive gases for an effective blast.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.