Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 26.68
Securing log loads — general
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 26.68 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Subject to subsection (2), a log load must be secured in accordance with
(a) this section, and
(b) whichever of the following sections applies:
(i) section 26.68.1 [highways and mixed transportation routes];
(ii) section 26.68.2 [entirely off-highway transportation routes].
(2) A log transporter carrying a log load that is not yet secured as required by subsection (1) may be moved within a loading area if no person is exposed to the risk of logs, log chunks or debris falling off the log transporter.
(3) If a log load is secured on a log transporter using wrappers or tiedowns, the following requirements must be met:
(a) the wrappers and tiedowns must be installed
(i) in the loading area or at a location that is close to the loading area,
(ii) as soon as practicable after the log load is loaded on the log transporter and, if the log transporter is a trailer, before the trailer is connected to a truck, and
(iii) so that
(A) the log load is secure and no logs, log chunks or debris will fall off the log transporter while the log load is being transported,
(B) the wrappers and tiedowns can be safely removed while load restraining equipment is in position,
(C) no working load limit of a wrapper or tiedown is exceeded and each anchor point for a tiedown has at least the working load limit of the tiedown, and
(D) each tiedown is located within 60 cm (23.6 in) horizontally from a bunk, flatdeck or other load supporting surface;
(b) during transportation, the wrappers and tiedowns must be checked and kept tight;
(c) logs in the log load must not be shifted or moved while the wrappers and tiedowns are installed or adjusted.
(4) A tiedown must not be used to secure a log load on a log transporter unless the tiedown is marked with its working load limit.
(5) Subject to subsection (6), bundle straps and banding must not be used to secure a log load on a log transporter.
(6) Bundle straps and banding may be used to secure a log load on a log transporter in a loading area if no person is exposed to the risk of logs, log chunks or debris falling off the log transporter.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.