Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 4.43.1
Storage racks
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 4.43.1 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) In this section, “storage rack” means a combination of steel frames, beams and associated accessories used, once assembled into a structure, to support materials and products, including, for example, a pallet rack or cantilever rack, but excludes shelving and display fixtures used for retail purposes.
(2) This section applies in respect of a storage rack that is
(a) 2.4 m (8 ft) or taller in height, as measured from the floor to the top of the highest shelf level of the storage rack, or
(b) under 2.4 m (8 ft) in height, if the materials and products are loaded on or unloaded off the storage rack by other than manual means.
(3) The employer must ensure that a storage rack in the workplace is
(a) capable of safely supporting the items stored on it,
(b) designed and constructed in accordance with good engineering practice, and
(c) used in accordance with the specifications and instructions of the manufacturer or a professional engineer.
(4) The employer must ensure that a qualified person installs and uninstalls the storage rack, in whole or in part, in accordance with the instructions of the manufacturer or a professional engineer.
(5) The employer must ensure that the instructions of the manufacturer or a professional engineer for safely loading, unloading and maintaining the storage rack are readily available in the workplace to workers.
(6) The employer must ensure that the rated capacity of the storage rack is clearly posted near the storage rack and readily visible to workers.
(7) The employer must ensure that any structural modification, including reconfiguration, of the storage rack is carried out in accordance with the specifications of the manufacturer or a professional engineer.
(8) The employer must ensure that a qualified person
(a) inspects the storage rack
(i) for wear, corrosion, damage, missing or incompatible parts, and signs of fatigue, and
(ii) at regular intervals that will prevent the development of unsafe working conditions,
(b) makes a record of the results of each inspection, and
(c) provides the record to the employer.
(9) The employer must ensure that, with respect to the storage rack,
(a) regular maintenance is done, and
(b) wear, corrosion, damage, missing or incompatible parts, and signs of fatigue are repaired or replaced in accordance with the specifications and instructions of the manufacturer or a professional engineer.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.