Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 23.12
Pipelines, fittings and valves
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 23.12 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Pipelines, piping systems, fittings and valves must
(a) be designed, constructed and maintained to safely withstand the anticipated internal pressures and external loads,
(b) be restrained from undue horizontal, vertical or swinging motion, and
(c) if applicable, meet the requirements of
(i) CSA Standard Z662-94, Oil and Gas Pipeline Systems, or
(ii) API Recommended Practice 520, Sizing, Selection, and Installation of Pressure-Relieving Devices in Refineries, Part I — Sizing and Selection (July 1990, 5th Edition) and Part II — Installation (November 1988, 3rd Edition), or
(iii) API Recommended Practice 521, Guide for Pressure-relieving and Depressuring Systems, dated November, 1990 (3rd edition), or
(iv) American Society of Mechanical Engineers (ASME) Standard B31.3-1993, Chemical Plant and Petroleum Refinery Piping.
(v) Repealed. [B.C. Reg. 312/2003, App. E, s. 24 (d).]
(2) When a valve is to be disassembled
(a) it must be depressurized, purged or otherwise made safe, and
(b) written safe work procedures must be followed.
(3) Process control and power systems must be designed to operate on the gas being used.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.