Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 22.125
Inspection before use
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 22.125 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) After a raise climber is installed and before it is put into service, the complete installation must be inspected and tested by authorized workers who have available to them the manufacturer's or professional engineer's manual which details specifications and test procedures.
(2) A complete record of the inspection and tests required by subsection (1) and all other inspections and tests, defects, damage or problems, and repairs or maintenance done must be entered in a raise climber log, which must be maintained at the site, and made available for inspection by an officer.
(3) All entries in the log must be dated and signed by the person who carried out the work, and the supervisor in charge of the installation must check and countersign the entries at least once each week.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.