Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 19.8

Testing equipment

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 19.8 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Electrical testing equipment may be used if it meets the requirements of (a) CSA Standard C22.2 No. 160-M1985 (Reaffirmed 1992), Voltage and Polarity Testers, or (b) CSA Standard CAN/CSA-C22.2 No. 231 Series-M89, CSA Safety Requirements for Electrical and Electronic Measuring and Test Equipment. (c) Repealed. [B.C. Reg. 312/2003, App. A, s. 23 (c).] (2) Electrical testing equipment not meeting a standard specified in subsection (1) may be used if it has (a) fusing or circuitry designed to protect the operator in the event of a fault resulting from inadvertent misuse of the meter, or a fault on the circuit being tested, (b) clearly and unambiguously marked measurement ranges, (c) lead wire insulation rated to the maximum voltage reading of the meter, (d) lead wires that are not cracked or broken, and having a current carrying capacity (ampacity) that meets or exceeds the maximum current measurement of the meter, and (e) a minimum exposure of metal on lead wire probes. (3) Appropriate safe work procedures must be established and followed for testing electrical equipment and circuits.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.