Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 14.1
Definitions
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 14.1 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
In this Part:
“chimney hoist” means a temporary hoist used for transporting personnel or materials during the construction of a chimney or similar structure;
“construction material hoist” means a material hoist consisting of a guiding and supporting structure and hoist equipment that is not a permanent part of a building, structure, or other work and that is installed and used during construction, alteration, or demolition to raise and lower materials required for the project;
“critical lift” means
(a) a lift by a mobile crane or boom truck that exceeds 90% of its rated capacity while it is lifting the load at a load radius of more than 50% of its maximum permitted load radius, taking into account its position and configuration during the lift,
(b) a tandem lift if the load on any one crane, hoist or other piece of powered lifting equipment exceeds 75% of the rated capacity of that crane, hoist or other piece of powered lifting equipment,
(c) a tandem lift involving the simultaneous use of more than two cranes, hoists or other pieces of powered lifting equipment,
(d) a lift of a person in a work platform suspended from or attached to a crane or hoist,
(e) a lift in which the centre of gravity of the load changes during the lift,
(f) a lift in which the length of one or more sling legs changes during a lift,
(g) a lift by a crane, boom truck or hoist, supported on a floating base, that exceeds 90% of rated capacity for the lifting system,
(h) a lift of a load over or between energized high voltage electrical conductors, or
(i) a lift of a submerged load;
“duty cycle work” means
(a) the use of a crane to do dragline work, clamshell work, dynamic compaction work or pile driving work, including pile extraction using a vibratory pile extraction device, or
(b) the use of a crane with an electromagnet or grapple for the handling of scrap metal and other similar materials;
“load bearing component” means any component that transfers load through a crane or hoist to the surface supporting the crane or hoist;
“sign truck” means a truck that is
(a) capable of acting as a crane and as an aerial ladder, and
(b) used as a work platform or used for hoisting loads or accessing a work location;
“tandem lift” means a lift using
(a) more than one crane or one hoist, or
(b) a crane or hoist and another piece of powered lifting equipment.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.