Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 26.16

Slope limitations

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 26.16 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Repealed. [B.C. Reg. 312/2003, App. B, s. 58 (a).] (2) If the manufacturer's maximum slope operating stability limit for logging equipment is known, the equipment must be operated within that limit. (3) If the manufacturer's maximum slope operating stability limit for logging equipment is not known, the equipment must be operated within the following limits: (a) a rubber tired skidder must not be operated on a slope which exceeds 35%; (b) a crawler tractor, feller buncher, excavator and other similar equipment must not be operated on a slope which exceeds 40%; (c) any other forestry equipment specifically designed for use on a steep slope must not be operated on a slope which exceeds 50%. (4) Despite subsections (2) and (3) but subject to subsection (5), logging equipment may be operated beyond the maximum slope operating stability limits specified in those subsections if (a) a qualified person conducts a risk assessment of that operation, and (b) written safe work practices acceptable to the Board are developed and implemented to ensure the equipment's stability during operation. (5) Despite anything in this section, logging equipment must not be operated in a particular location or manner if its stability cannot be assured during that operation.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.