Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 15.5

Component identification

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 15.5 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Rigging fittings must be marked with the manufacturer's identification, product identifier and the working load limit or sufficient information to readily determine the WLL. (2) The WLL of existing fittings not identified as specified in subsection (1) must be determined by a qualified person, marked on the fitting and such fittings must be removed from service by January 1, 2001.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.