Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 10.9
Group lockout procedure
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 10.9 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) If a large number of workers are working on machinery or equipment or a large number of energy isolating devices must be locked out, a group lockout procedure that meets the requirements of subsections (2) to (7) may be used.
(2) In a group lockout procedure 2 qualified workers must be responsible for
(a) independently locking out the energy isolating devices,
(b) securing the keys for the locks used under paragraph (a) with personal locks or other positive sealing devices acceptable to the Board, and
(c) completing, signing and posting a checklist that identifies the machinery or equipment components covered by the lockout.
(3) Before commencing work each worker working on the locked out components must apply a personal lock to the key securing system used in subsection (2) (b).
(4) Workers may lock out a secondary key securing system if 2 qualified workers lock out the primary key securing system and place their keys in the secondary system.
(5) On completion of the worker's work, each worker referred to in subsections (3) and (4) must remove the worker's personal lock from the key securing system.
(6) When the requirements of subsection (5) have been met and it has been determined that it is safe to end the group lockout, 2 qualified workers must be responsible for removing their personal locks or the positive sealing device(s) from the key securing system or systems containing the keys for the locks used under subsection (2) (a), and once those keys are released, the system is no longer considered to be locked out.
(7) The written group lockout procedure must be conspicuously posted at the place where the system is in use.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.