Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 24.93

Requirements for sensors and alarms

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 24.93 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) An owner of a fishing vessel must ensure that a heat sensor, connected to an alarm system, is installed (a) above the galley stove or near the stove pipe, and (b) in proximity to the engine exhaust. (2) The owner must ensure that a water level sensor, connected to an alarm system, is installed (a) in the machinery space bilges, and (b) in the shaft log or lazarette. (3) The owner must ensure that main engines are fitted with low oil pressure and high temperature sensors connected to an alarm system. (4) The owner must ensure that a sensor and alarm system is installed if the Board considers this necessary to detect leaks of potentially explosive fuel used in engines or appliances. (5) The owner must ensure that an audible marine grade carbon monoxide sensor, connected to an alarm system where practicable, is installed in crew quarters.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.