Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 6.59.1
Risk assessment
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 6.59.1 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) In this section, “existing monitoring data” means data
(a) gathered under section 5.53 or 6.61, or
(b) as described in section 6.61.1 (2) (b).
(2) An employer must not permit workers to engage in a work activity or lead process that may expose workers to lead dust, fumes or mist unless a risk assessment has first been completed by a qualified person.
(3) The risk assessment must include consideration of all of the following:
(a) the hazards of lead, including the exposure limit;
(b) any information contained on a label or in a safety data sheet provided by a supplier, manufacturer or employer in respect of
(i) the lead content in the materials, coatings or products to be used in the lead process, and
(ii) the health effects of lead exposure;
(c) the scope, circumstances and nature of the work activity or lead process, including
(i) whether section 5.50 applies, given the length of a shift,
(ii) any changes between shifts in the scope, circumstances or nature of the work activity or lead process,
(iii) whether the work activity involves welding, soldering, brazing, cutting or other hot work processes,
(iv) the potential routes of exposure to lead dust, fumes or mist during the work activity or while engaging in the lead process, including by inhalation or ingestion,
(v) the potential level and duration of the exposure referred to in subparagraph (iv), and
(vi) the results of any relevant health monitoring, if applicable, conducted
(A) in relation to an exposure control plan under section 5.54 (2) (f), or
(B) as part of a health protection program under section 6.67;
(d) the effectiveness of existing and planned control measures, as determined through exposure monitoring, to prevent or minimize worker exposure to lead dust, fumes or mist, including with respect to access to the workplace by unprotected workers;
(e) any additional information the employer needs to complete the risk assessment.
(4) A qualified person may rely on existing monitoring data for the purpose of assessing control measures under subsection (3) (d) only if it is reasonable to do so based on both of the following:
(a) the relevance of the existing monitoring data and whether additional exposure monitoring may be needed to reassess the effectiveness of existing and planned control measures because of changes in personnel or to the scope, circumstances or nature of the work activity or lead process;
(b) if applicable and available, the results of any health monitoring conducted on workers since the existing monitoring data was gathered.
(5) An employer must ensure that a risk assessment is reviewed by a qualified person if any of the following occur:
(a) there is reason to believe the risk assessment is no longer valid;
(b) there has been a significant change in the scope, circumstances or nature of the work activity or lead process to which the risk assessment relates;
(c) the results of any exposure monitoring or health monitoring show it to be necessary.
(6) If changes to the risk assessment are necessary as a result of the review under subsection (5), the employer must ensure that the risk assessment is changed accordingly.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.