Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 20.66
Strand vises and hydraulic devices
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 20.66 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Repealed. [B.C. Reg. 312/2003, App. B, s. 40.]
(2) Strand vises must not be reused until they have been inspected by a qualified person and determined to be safe for reuse.
(3) Damaged or worn vises and hydraulic equipment must be removed from service.
(4) The supervisor must ensure that operators are given the maximum allowable values for both stretch of the tendon and hydraulic pressure at the pump.
(5) If there is a significant difference between the expected value and the measured value for either stretch of a tendon or hydraulic pressure at the pump, the workers must stop operations on that particular tendon and consult with the professional engineer in charge to obtain instructions on how to proceed.
(6) Each jack pressure gauge must be checked at frequent intervals against a master gauge, and the site engineer must be furnished with a calibration chart.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.