Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 21.74.2

Extracting explosives

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 21.74.2 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Extracting or attempting to extract a primer or explosive of the nitroglycerine type from a loaded hole is prohibited. (2) A blaster or a person authorized by the blaster may remove ammonium nitrate, water gel or emulsion type explosives from a blast hole only if (a) the blast hole does not contain a detonator, and (b) the removal procedure is carried out with caution, using (i) moderate air or water pressure or a combination of moderate air and water pressure, and (ii) a blowpipe made of non-metallic materials. (3) A blaster or a person authorized by the blaster may remove a device containing high melting explosive (HMX) that has been exposed to a temperature exceeding 150°C from a blast hole only if (a) safe work procedures have been developed and communicated to workers involved in the removal, and (b) the removal procedure is carried out with caution. (4) Until a misfire has been successfully detonated with a fresh primer, (a) the unexploded charge that contains a primer must not be removed and no attempt to remove it may be made, and (b) no other work may take place within the danger area.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.