Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 8.12

Use with all-terrain vehicles, snowmobiles and motorcycles

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 8.12 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) Operators and passengers on all-terrain vehicles, snowmobiles and motorcycles must wear headgear meeting the requirements of (a) CSA Standard CAN3-D230-M85, Protective Headgear in Motor Vehicle Applications, (b) British Safety Institution Standard BS5361:1976, Specification: Protective Helmets for Vehicle Users, (as amended to 1981), (c) Snell Memorial Foundation 1995 Standard for Protective Headgear for Use with Motorcycles and Other Motorized Vehicles, or (d) US Federal Standard for Motorcycle Helmets (Title 49 — Transportation — Part 571.218). (e) Repealed. [B.C. Reg. 312/2003, App. A, s. 9 (c).] (2) Headgear in good condition meeting earlier editions of a standard listed in subsection (1) may remain in service if purchased before April 15, 1998. (3) When an all-terrain vehicle is operated within a specific location, with no rollover hazard area and no area containing a significant hazard that may cause loss of control and at a speed not exceeding 20 km/h (13 mph), safety headgear meeting the requirements of section 8.13 may be used in place of headgear specified in subsection 8.12 (1).
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.