Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 27.30

Cracks in band saws

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 27.30 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) A band saw, other than a shake band saw, with a crack exceeding the limit specified in Table 27-2 must be removed from service until the crack is repaired and the saw retensioned by a qualified person. (2) A band saw, other than a shake band saw, with a crack not exceeding the limit specified in Table 27-2 must be removed from service until the crack is repaired or the lengthening of the crack has been arrested by centre punching or other effective means, and the saw retensioned as necessary, by a qualified person. (3) A shake band saw with a crack must not be used.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.