Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 26.56
Work area arrangement
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 26.56 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) In this section, “work area” includes any area in which any forestry work is done but does not include the travelled portion of a road unless that portion of the road is being used as a landing.
(2) Work in a work area in a forestry operation must be planned and the work area must be located, constructed, maintained and operated to ensure the following:
(a) logs can be moved safely in the area;
(b) log piles and equipment used to handle the logs do not become unstable or otherwise create a hazard;
(c) workers are able to work in locations clear of moving logs and equipment;
(d) workers are not exposed to incoming or runaway logs or other debris;
(e) the area is kept free from buildup of bark and other debris to the extent that it would pose a risk to workers;
(f) an effective method of dust control is used and maintained.
(3) Log piles must, to the extent practicable, be located on stable and relatively level ground.
(4) Log piles must not be higher than the safe operating reach of equipment being used to handle the logs.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.