Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 14.3
Identification
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 14.3 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) A crane or hoist must be permanently identified by the legible display of the manufacturer's name, model and serial number on the structure.
(2) Each major interchangeable structural component of a crane or hoist must be uniquely identified and must be legibly marked to enable confirmation that the component is compatible with the crane or hoist.
(3) If a crane or hoist was not commercially manufactured and does not have a model number or serial number, the crane or hoist must not be used unless engineering documentation signed by a professional engineer, including technical specifications and instructions for use, are available at the workplace where the crane or hoist is being used.
(4) A crane or hoist described in subsection (3) must be identified in a manner that links the engineering documentation referred to in that subsection with that crane or hoist.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.