Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 16.12
Securing loads
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 16.12 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) A load for transport on mobile equipment must be loaded, secured and unloaded in a manner that prevents a hazard to persons.
(2) If a hazard may be created due to load shift upon deceleration that would endanger the occupants of the cab of
(a) a flatbed truck, or
(b) a truck and flatbed combination
used to haul long steel structural members, poles, pipes, lumber, logs or similar materials, the means used under subsection (1) must include a cab guard, a bulkhead or another effective means to prevent the hazard.
(3) If perimeter pins are used as part of the restraint system for cylindrical objects, the pins must extend above the top of the uppermost layer adjacent to the pin by the diameter of the largest cylindrical object stacked above the uppermost layer adjacent to the pin, and have a minimum height of 46 cm (18 in).
(4) If cylindrical objects are individually blocked or otherwise effectively restrained by specialized dunnage, the perimeter pins specified in subsection (3) are not required.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.