Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 16.43

Lift trucks

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 16.43 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) The design, fabrication, use, inspection, maintenance and repair of a lift truck must meet (a) CAN/CSA Standard B335-15 — Safety standard for lift trucks, or (b) as applicable, (i) ANSI/ITSDF B56.1a-2018, Safety Standard for Low Lift and High Lift Trucks, (ii) ANSI/ITSDF B56.6-2016, Safety Standard for Rough Terrain Forklift Trucks, or (iii) ISO 10896 Rough-Terrain Trucks — Safety Requirements and Verification: Part 1 (2012): Variable-Reach Trucks; Part 2 (2016): Slewing Trucks; Part 4 (2015): Additional Requirements for Variable-Reach Trucks Handling Freely Suspended Loads or the earlier version of the applicable standard that applied on the date of manufacture of the lift truck. (2) Operator training for lift trucks must meet the requirements of Clause 6 of the standard referred to in subsection (1) (a). (3) In addition to complying with the applicable requirements in this Part, a variable reach rough terrain lift truck, as defined in section 2 of the standard referred to in subsection (1) (b) (ii), must meet and be used in accordance with the requirements of sections 14.5 (3), 14.7, 14.8, 14.12, 14.43 and 14.69 of this Regulation. (4) A record of inspections and maintenance meeting the requirements of section 4.9 must be kept for a variable reach rough terrain lift truck, as defined in section 2 of the standard referred to in subsection (1) (b) (ii). (5) In areas where lift truck use is separated from pedestrian traffic, a lift truck may travel forward with an elevated load if such operation will improve the operator's view of the path of travel, provided that operating conditions are maintained to ensure vehicle stability and the specifications of the mobile equipment manufacturer are not compromised. (6) A unitized load being transported on a lift truck must not project a distance greater than half its height above the fork carriage, back rest or back rest extension of the lift truck. (7) No part of a load of loose objects may project above the fork carriage, back rest or back extension of a lift truck. (8) A load that could shift during transportation must be restrained if such shifting would result in the load or the lift truck becoming unstable. (9) Subsections (6) and (7) do not apply if the load is assembled and handled in such a way that there is no possibility of any part of the load falling off.
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.