Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 23.32
Inspection and repair
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 23.32 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Each drilling and service rig must be inspected and repaired in accordance with the following applicable standards published by the Canadian Association of Oilwell Drilling Contractors:
(a) Recommended Practice 1.0, for Drilling Rigs, Mast Inspection and Certification, January 1, 1994;
(b) Recommended Practice 2.0, for Drilling Rigs, Overhead Equipment Inspection and Certification, January 1, 1994;
(c) Recommended Practice 3.0, for Service Rigs, Inspection and Certification of Masts, January 1, 1994;
(d) Recommended Practice 4.0, for Service Rigs, Overhead Equipment Inspection and Certification, January 1, 1994;
(e) Recommended Practice 1.0A, Addendum for Drilling Rigs, Substructure Inspection and Certification, September 12, 1995.
(2) Inspections and repairs must be recorded in a Canadian Association of Oilwell Drilling Contractors log book or equivalent log acceptable to the Board.
(3) The log must be available on site for review by an officer.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.