Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 23.37
Blowout preventers
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 23.37 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) When installing a blowout preventer
(a) the preventer must be effectively restrained while it is being aligned, and
(b) workers are prohibited from being located where they may be injured if the preventer swings or drops.
(2) When removing a blowout preventer, 2 opposing anchor lines must remain in position until
(a) the lifting sling is attached to the preventer,
(b) the slack in the hoisting line and rigging is taken up, and
(c) the draw works brake handle is tied down.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.