Occupational Health and Safety Regulation, B.C. Reg. 296/97
Section 27.49
Clipper saw guards
Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 27.49 · last amended September 1, 2027 · read from BC Laws on November 17, 2026
The text
(1) Except for the portion that is exposed to trim shingles, a clipper saw must be effectively guarded by a substantial metal guard of at least 16 mm (5/8 in) diameter round stock, or a flat bar of equivalent strength, installed not more than 100 mm (4 in) above the saw and not more than 13 mm (1/2 in) from the plane of the saw.
(2) Clipper saw boards must have substantial finger guards, not less than 130 mm (5 in) long and 32 mm (1 1/4 in) deep, designed and adjusted to prevent the operator's fingers from contacting any exposed saw teeth below the clipper board.
Read the Occupational Health and Safety Regulation on BC Laws ↗
Made under Workers Compensation Act, RSBC 2019, c. 1.