Occupational Health and Safety Regulation, B.C. Reg. 296/97

Section 16.35

ROPS standards

Cite as Occupational Health and Safety Regulation, B.C. Reg. 296/97, s. 16.35 · last amended September 1, 2027 · read from BC Laws on November 17, 2026

The text

(1) A ROPS installed on mobile equipment other than (a) an excavator between 6 tonnes (13 250 lbs) and 50 tonnes (110 231 lbs), (b) powered ride-on turf care equipment heavier than 400 kg (882 lbs), or (c) a UTV must meet the requirements of the CSA Standard B352.0-16 — Roll-over protective structures (ROPS), falling object protective structures (FOPS), operator protective structures (OPS), and tip-over protective structures (TOPS) for mobile machinery — General Canadian requirements or the earlier version of the standard that applied on the date of manufacture of the mobile equipment. (2) A ROPS installed on an excavator between 6 tonnes (13 250 lbs) and 50 tonnes (110 231 lbs) must meet the requirements of the ISO 12117-2:2008 Earth-moving machinery — Laboratory tests and performance requirements for protective structures of excavators — Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t. (3) A ROPS installed on powered ride-on turf care equipment heavier than 400 kg (882 lbs) must meet the requirements of ISO 21299:2009 Powered ride-on turf care equipment — Roll-over protective structures (ROPS) — Test procedures and acceptance criteria. (4) A ROPS installed on a UTV must meet the requirements of section 16.41 (1).
Read the Occupational Health and Safety Regulation on BC Laws ↗

Made under Workers Compensation Act, RSBC 2019, c. 1.